paulmaley Posted July 11, 2010 Share Posted July 11, 2010 Hello, I'm currently building a Superlight 150 and in the same pack as the 2x knee trim panels I've found another flat black panel & I can't work out what it's for... It's 250mm long down one side (4x rivet holes) and 180mm long down the other (with 3x rivet holes), 145mm wide. Sorry for the lack of picture but I only have dial up at the moment. Any suggestions welcomely received. Many Thanks, Paul. Link to comment Share on other sites More sharing options...
tbird Posted July 11, 2010 Share Posted July 11, 2010 similar thread here not sure if its helpful Link to comment Share on other sites More sharing options...
paulmaley Posted July 12, 2010 Author Share Posted July 12, 2010 Thank you very much, I was totally bamboozled. As ever, a simple explanation Link to comment Share on other sites More sharing options...
spiderlane Posted July 12, 2010 Share Posted July 12, 2010 FWIW I have a similar panel left over too (R400 SV) - I assumed it was a heater blanking plate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now