bourne17 Posted July 1, 2010 Share Posted July 1, 2010 My stack speedo isn't working and I have noticed that the cable running down the front suspension is damaged. Am I able to repair the cable or do I need a new unit? Link to comment Share on other sites More sharing options...
rj Posted July 1, 2010 Share Posted July 1, 2010 It's just an earth, a v+ and a signal, which is digital. Easy to repair. Link to comment Share on other sites More sharing options...
akb Posted July 1, 2010 Share Posted July 1, 2010 £140 and a lot of pain trying to get the old cable out right back to the stack dash unit to replace the old one. No need though. I jointed mine; it works fine. Simple solder job with some shrink wrap tubing to keep the water out. You may find some spare cable inside the chassis at top of suspension arm to help with the jointing. Andy Link to comment Share on other sites More sharing options...
bourne17 Posted July 1, 2010 Author Share Posted July 1, 2010 Many thank for your help, I'll give it a go at the weekend and hope that the sensor isn't damaged! Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted July 2, 2010 Support Team Share Posted July 2, 2010 If you do have to replace it then take a look at Richard's link on this thread: here. Michael and I both bought sensors from there at half the cost from Stack/Caterham. Yellow SL #32 - member of Drowned Rat Racing Link to comment Share on other sites More sharing options...
bourne17 Posted July 2, 2010 Author Share Posted July 2, 2010 Excellent thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now