Etienne 7 Posted June 29, 2010 Share Posted June 29, 2010 Hello, An advert on behalf of a friend sevener. Cheers, _________________________________________________________ Hello For Sale a full set of throttle bodies with all the ancilliaries for a Caterham or Elise with Rover engine. It includes - A pair of throttle bodies Rover on the admission manifold - ECU Rover - loom - idle stepper motor - injectors (white colour) - Air filter ITG - accelerator cable (for an RHD Caterham) - fuel pressure regulator - inertia switch - depressure filter This set is coming from a Caterham Seven 1.8 Superlight R with VHPD engine and had run about 5000 miles. Everything has been cleaned and dry stored . Here's what you need to upgrade your Rover K up to 200BHP (1.8L). More photos of the product here http://forum3m.free.fr/ebay/throttle/ 650£ including SHIPPING Please get in touch with me at erwan.chapelier@gmail.com _________________________ BRG 1600 Sprint / Black Elise S1 Lotus Seven - Anything Else Is Just Transportation Edited by - Etienne 7 on 29 Jun 2010 11:03:37 Link to comment Share on other sites More sharing options...
simonpa Posted June 29, 2010 Share Posted June 29, 2010 Hi - these have been on ebay a few times, haven't they? TBH, these older bodies normally only make about £250, possibly £300-£350 with the other parts (if you are fortunate enough to find someone who needs them)... Link to comment Share on other sites More sharing options...
Etienne 7 Posted June 29, 2010 Author Share Posted June 29, 2010 From the seller : Thanks for your interest. These are not only throttle bodies but a complete set to upgrade with pipe, air filter, loom, injectors, ECU, etc... Not exactly the same product as what simonpa has in mind. They were indeed listed on ebay a few months ago but did not go because of the reserve price not met. I was offered £640 at that time. Now they must go, I am opened to any proposals. I am sorry I cannot post in the blatchat. Please write me a mail for further information. Sevenly yours Link to comment Share on other sites More sharing options...
Slider7 Posted June 30, 2010 Share Posted June 30, 2010 I am sorry I cannot post in the blatchat Solution : just become a member __________________ Flanders AR - Flanders.AR@gmail.com “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Edited by - Slider@7 on 30 Jun 2010 08:20:03 Link to comment Share on other sites More sharing options...
rj Posted June 30, 2010 Share Posted June 30, 2010 Bruno Edited to add: The ECU is NOT programmable, which means you'll have to source genuine VHPD cams to make it run properly. I am in no doubt you can make it run reasonably well with aftermarket bits, but you'd probably get bored with the ECU sooner rather than later. Edited by - RJ on 30 Jun 2010 09:22:00 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now