Anthony Posted August 27, 2002 Share Posted August 27, 2002 I have fitted a new FIA Tall roll-bar Caterham advised the std strut will fit, but mine would appear to be out of alignment, taking into account new holes will need to be drilled Anyone had similar experiences please ? Regards Anthony X-Flow-power; the way forward Link to comment Share on other sites More sharing options...
ian balson Posted August 27, 2002 Share Posted August 27, 2002 Anthony, If you're talking about the Petty Strut, my strut is telescopic so easy to adjust. Or am I missing the point here? Rgds Ian ian_balson@yahoo.co.uk Link to comment Share on other sites More sharing options...
NickD Posted August 27, 2002 Share Posted August 27, 2002 Anthony, I fitted the strut from my original std FIA bar to a tall one with no more than the usual degree of misalignment or trouble. I fitted a tubular spacer to cover the old bolt holes. Link to comment Share on other sites More sharing options...
NickD Posted August 27, 2002 Share Posted August 27, 2002 Anthony, I fitted the strut from my original std FIA bar to a tall one with no more than the usual degree of misalignment or trouble. I fitted a tubular spacer to cover the old bolt holes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now