Dude Posted June 14, 2010 Share Posted June 14, 2010 Original Caterham Throttle bodies off a R400r engine, little used max 2000 miles sold as I am now on Duratec, email me for photos £550 + postage Dry sump tower, bell housing, pump and pipes, off same engine and little used, max 2000 miles, again, swapped to Duratec, email or blatmail for photos if interested £550 + postage or £950 + postage for both as a package. Cheers Andy S3 superlight with 260 Cosworth CSR ponies squeezed in. Link to comment Share on other sites More sharing options...
Dude Posted June 14, 2010 Author Share Posted June 14, 2010 forgot to say they are R500 roller barrel throttle bodies from Caterham. S3 superlight with 260 Cosworth CSR ponies squeezed in. Link to comment Share on other sites More sharing options...
paul abrahams Posted June 14, 2010 Share Posted June 14, 2010 Sorry about the numpty question, but I assume these won't fit a duratec. If they will I'm very interested Link to comment Share on other sites More sharing options...
Dude Posted June 14, 2010 Author Share Posted June 14, 2010 They will fit, The only reason I am selling them is that I bought a full engine, dry sump, loom and throttle bodies etc out of a CSR 260 and squeezed it in my motor, so my old stuff just became surplus, they do work as the same set up is on my Duratec. Cheers Andy S3 superlight with 260 Cosworth CSR ponies squeezed in. Link to comment Share on other sites More sharing options...
Graham King Posted June 14, 2010 Share Posted June 14, 2010 Dude, YHM. Graham. R7 GPK Superlight #85 Link to comment Share on other sites More sharing options...
paul abrahams Posted June 14, 2010 Share Posted June 14, 2010 Andy YHM Link to comment Share on other sites More sharing options...
L7 FST Posted June 14, 2010 Share Posted June 14, 2010 If still available, dibs on the dry sump kit please. Andy YHM. Stephen Link to comment Share on other sites More sharing options...
Dude Posted June 15, 2010 Author Share Posted June 15, 2010 I need to adjust the thread as I am a doughnut, the throttle bodies are ONLY for a K series, they are R500 K series roller barrel throttle bodies and are supplied with the back plate, fuel rail, brackets to mount, injectors, and the throttle pot switch, sorry for any confusion. Andy S3 superlight with 260 Cosworth CSR ponies squeezed in. Link to comment Share on other sites More sharing options...
david nelson Posted June 15, 2010 Share Posted June 15, 2010 Interested in TB for Adrian Williams. I hope you will here from him tomorrow. David Link to comment Share on other sites More sharing options...
Adrian Williams Posted June 15, 2010 Share Posted June 15, 2010 Hi Andy YHM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now