RoyH Posted June 12, 2010 Share Posted June 12, 2010 The BC search function isnt working for me. Can someone please advise the torque for my MB's. Link to comment Share on other sites More sharing options...
elie boone Posted June 12, 2010 Share Posted June 12, 2010 If ford studs 10mkg or 100Nm, it's the stud that defines the torque not the type of wheel Link to comment Share on other sites More sharing options...
RoyH Posted June 12, 2010 Author Share Posted June 12, 2010 2001 R500 Was under the impression that the torque was lower on the Barnby's than alloys due to their magnesium (ie soft) construction. Edited by - RoyH on 12 Jun 2010 17:42:09 Link to comment Share on other sites More sharing options...
rj Posted June 12, 2010 Share Posted June 12, 2010 I'm doing them up to 80Nm (55lbf AFAIK) Never had one come off. Link to comment Share on other sites More sharing options...
RoyH Posted June 12, 2010 Author Share Posted June 12, 2010 Search function working. 55lb/ft and I have had one come off - recently! Link to comment Share on other sites More sharing options...
Adrian Williams Posted June 12, 2010 Share Posted June 12, 2010 55 or 60lbft works for me Roy, I haven't lost one yet. Adrian Link to comment Share on other sites More sharing options...
Cookie Monster Posted June 12, 2010 Share Posted June 12, 2010 From what I have heard Roy you need to do them up a bit tighter Phil. Link to comment Share on other sites More sharing options...
Englishmaninwales Posted June 13, 2010 Share Posted June 13, 2010 55lbft Link to comment Share on other sites More sharing options...
david nelson Posted June 13, 2010 Share Posted June 13, 2010 Agree 55 or 80nm David Link to comment Share on other sites More sharing options...
rj Posted June 13, 2010 Share Posted June 13, 2010 Roy, You might need to have your torque wrench calibrated? (Or note that the click you hear is from your elbow?) Link to comment Share on other sites More sharing options...
Jason Plato Posted June 13, 2010 Share Posted June 13, 2010 Roy if you stand on the end of a 12" long socket handle = 55ft/lb 😬 here is my Duratec R .... C7 TOP Taffia AO Link to comment Share on other sites More sharing options...
RoyH Posted June 13, 2010 Author Share Posted June 13, 2010 😬 😬 😬 rotten lot Link to comment Share on other sites More sharing options...
Racing Snake Posted June 14, 2010 Share Posted June 14, 2010 Just have a quick fiddle with them before you go out Roy Mad Hatter Racing - Feel The Duralight R Torque 😬 Carl @ Penn 7's Caution - May Contain Nuts ! Link to comment Share on other sites More sharing options...
anthony1956 Posted June 15, 2010 Share Posted June 15, 2010 me too K 2001 R500 I have been using 75nm , I check before each outing - usually not lost one yet, but did on a car many years ago (1976 )- hence the checks, once bitten. Anthony Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now