Ali hubs - Ford fitment

[MartinS]

Hi,

 

I want to try replacing one or both of my hubs to see if it cures my run-out problem. I'm looking for the standard Ali hubs fitted to pre-2003 de-dion cars (ford pcd). I'd prefer it if bearing runners were fitted, but not massivly bothered if not.

 

Anyone upgraded to the newer hubs and got some of the old ones kicking about?

 

M.

 

Edited by - martins on 9 May 2010 22:54:38

[MartinS]

BTTT

 

-------------------------------

Martin Saunders

DVA Power 1.8SS - upgradeitus finally bit me!

[Nick Chan]

Hi Martin,

 

Following on from Jonathan's reply about De Dion uprights, perhaps this might be very useful for you too here

 

HTH

 

Nick

 

-----

Back in a BEC! - but done alright in Class 1...

[Tyrone]

I've got one hub in the garage.

 

NE Area Rep

Then raise the scarlet standard high.

Within its shade we'll live and die,

Though cowards flinch and traitors sneer,

We'll keep the red flag flying here.

[MartinS]

Hi Tyrone, sorry for the slow reply, I'll send you a blatmail

 

-------------------------------

Martin Saunders

DVA Power 1.8SS - upgradeitus finally bit me!

[Tyrone]

Martin,

 

My blatmail address was out of date. Please send again.

 

NE Area Rep

Then raise the scarlet standard high.

Within its shade we'll live and die,

Though cowards flinch and traitors sneer,

We'll keep the red flag flying here.

[Tyrone]

Martin, I found the hub but missed the post office . Do you want the disc left on? It's looking a bit rusty, the hub looks fine.

 

NE Area Rep

Then raise the scarlet standard high.

Within its shade we'll live and die,

Though cowards flinch and traitors sneer,

We'll keep the red flag flying here.