CaterBram Posted May 2, 2010 Share Posted May 2, 2010 After my recent engine failure looking at upgrading to forged pistons. Does anyone have a spare set of 83.5mm or 84.0mm ? Q469 WET, 1990 1690 Xflow Long Cockpit in Ali except for the red bits. We are doing Yorkshire 3 Peaks in aid of Rotherham Hospice Edited by - Caterbram Jnr on 2 May 2010 21:08:36 Link to comment Share on other sites More sharing options...
apjenkins Posted May 6, 2010 Share Posted May 6, 2010 I have a set of secondhand 83.5mm Accrulite pistons available, however this bore would put you in Class Two. I also have a set of secondhand Hepolite +60thou which would allow you to stay in Class One I think. I'll bring them all to Llandow / Curbs / MIRA if you want a look at them. @ndrew. Link to comment Share on other sites More sharing options...
CaterBram Posted May 6, 2010 Author Share Posted May 6, 2010 Andrew, I'm already in class 2 with +90 thou cast pistons, which i've just melted and replaced one. So the 83.5mm Accrulite definatly are tempting . Q469 WET, 1990 1690 Xflow Long Cockpit in Ali except for the red bits. Edited by - CaterBram Jnr on 6 May 2010 12:22:34 Link to comment Share on other sites More sharing options...
CaterBram Posted May 6, 2010 Author Share Posted May 6, 2010 Just checked on my Calc's I've currently got cast +90's fitted on sloppy bores and the 83.5mm are +99's. so should be able to get all 4 bore's honed out nicely to the correct clearances. We can have a look and discuss at Llandow. Chris. Q469 WET, 1990 1690 Xflow Long Cockpit in Ali except for the red bits. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now