Griff Posted March 28, 2010 Share Posted March 28, 2010 I'm looking for a replacement +0.090 bored 711M block to replace mine which has cracked on No1. The casting number on mine is 711M 6015BA so something compatable with that as ideally I just want to do a straight swap of parts. If the bore is +0.090 and in good condition just needing honing, great. If it's smaller than +0.090 then I'll get it rebored, that's good too. If you don't have one to sell, but know good places to find one, do let me know. Cheers, Mike Link to comment Share on other sites More sharing options...
Dave B Posted March 28, 2010 Share Posted March 28, 2010 Cant do linky things but there are a few on ebay at the mo. Dave B Link to comment Share on other sites More sharing options...
DaveMorris Posted March 30, 2010 Share Posted March 30, 2010 If you fail to find a block I have a set of Wilwood cylinder liners - if they would be any good to you. (Can't remember the dimensions of them at present - but if you want them - then priced at 60% of whatever Wilwood would charge you.) Dave. Link to comment Share on other sites More sharing options...
Eugene Posted April 6, 2010 Share Posted April 6, 2010 I think Chris Wheeler at Teh 7 Workshop may have some blocks available... Don't tell him I said so! Small Boy - with Loud Toy! Co-founder of the BOG Club See Eugene here and see what I do here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now