TonyR Posted August 17, 2002 Share Posted August 17, 2002 I have noticed that the cups of both top ball joints are not level. The top of the nearside joint faces forward at an angle of approx 20 degrees. The offside one faces back again at around a 20 degree angle. Should I undo the locking nut in the wishbone and level up the joints or will this change the camber. Car currently pulls slightly to the left, even after tracking adjusted at post build check carried out last week. TonyR Link to comment Share on other sites More sharing options...
Chelspeed Posted August 17, 2002 Share Posted August 17, 2002 It will change the camber but not by a lot, 1/10 of a degree sort of thing. If your car has already been set up very accurately then best not fiddle. If it's just been done roughly then the amount of change will probably not be critical so best put them both level for peace of mind. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now