X Flow Parts and 3 D Ignition

[George C]

1700cc Accralite forged pistons, polished and lightened con rods with ARP bolts, tuftrided and balanced crank, uprated bearings etc. All run as a set with low mileage from new (road use and one track day) and suitable up to 7500 rpm. Will be inspected by professional and the crank will be crack tested. New rings etc can be provided if required. Available due to upgrade and can be inspected as my engine is stripped for upgrade. £ 700.

 

3 D Weber Alpha wasted spark ignition kit (ECU, wiring loom, temperature, throttle and crank sensors) supplied by Roger King (and mapped) for 155bhp X Flow (parts above). Rev limit set at 7500 - phased to 7700. Good condition etc. Instructions available and still in car (without engine) to see how it all goes together. £ 400.

 

Location - Nr. Stowmarket, Suffolk.

 

 

[CaterBram]

Are the pistones, con rods, etc still available ?

 

Can you confirm the piston size if they are , i'm assuming 83.5mm

 

Q469 WET, 1990 1690 Xflow Long Cockpit in Ali except for the red bits.

We are doing Yorkshire 3 Peaks in aid of Rotherham Hospice