Area Representative Paul Richards Posted January 21, 2010 Area Representative Share Posted January 21, 2010 I want to fit a pressure relief remote thermostat and retain the heater - is this possible? I also have a laminova that I'd like to retain. It's currently in the top hose but I wonder where is best to mount it in the new set up. Any recommendations? Paul Richards Area Representative - L.A.D.S. (Lancashire and District Sevens) LADS Website Growing old is compulsory - Growing up is optional Link to comment Share on other sites More sharing options...
Bricol Posted January 21, 2010 Share Posted January 21, 2010 Heater - yes - I have. You don't disturb the heater plumbing. As for laminova - you're going to find the top hose very short of space. When I get round to it, I'll be making a bespoke end plate for my laminova to allow me to connect all the hoses together with the minimum of joints. Bri Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted January 21, 2010 Author Area Representative Share Posted January 21, 2010 Bri Thanks for the response - good to know that it's possible to keep the heater. As far as the laminova goes I was wondering about fitting a T in the top hose and fitting the laminova in the hose between the T and the prrt. I'll have to progress my rebuild a bit further to see if I have enough space for this. Paul Richards Area Representative - L.A.D.S. (Lancashire and District Sevens) LADS Website Growing old is compulsory - Growing up is optional Link to comment Share on other sites More sharing options...
MartinWoodham Posted January 22, 2010 Share Posted January 22, 2010 my PRRT is just behind the rad, with the takeoff from the top hose, and the PRRT itself just in front of the submarine pipe. so nowhere near the heater piping. I don't actually have a heater but the heater hose is bypassed from the original stat housing round to the water rail where it exits the head. Works a treat. Martin supersported ex-Roadsports B Link to comment Share on other sites More sharing options...
PAUL MARRIOTT Posted January 22, 2010 Share Posted January 22, 2010 Paul I've put mine between the PRRT outlet and the block inlet so that it acts as a heater to warm the oil on start up and gets max, but controlled, cooling when things are hot. It all fits nicely under the Jenveys. Paul M Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted January 22, 2010 Author Area Representative Share Posted January 22, 2010 Paul I read your comments to mean you've pu the laminova in the bottom hose betweenn the PRRT and the original thermostat housing Paul Richards Area Representative - L.A.D.S. (Lancashire and District Sevens) LADS Website Growing old is compulsory - Growing up is optional Link to comment Share on other sites More sharing options...
PAUL MARRIOTT Posted January 22, 2010 Share Posted January 22, 2010 You got it Paul 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now