doz Posted August 7, 2002 Share Posted August 7, 2002 Can anyone advise me if there is fixing brackets made to go onto the bottom of the slide rails of the caterham seat and how do these fix to the floor am changeing from fibre glass seats which are fixed with alloy brackets on tobottom rail and at back in alloy thanks doz Link to comment Share on other sites More sharing options...
I reply to every thread Posted August 8, 2002 Share Posted August 8, 2002 There is an bar that goes from the chassis bar in front of the seats to the mounting points at the base on the bulkhead. The bar bolts to these two points & the seats bolt to it Link to comment Share on other sites More sharing options...
robbieclark Posted August 8, 2002 Share Posted August 8, 2002 If you're changing from fibreglass seats then I might be interested in them, mail me, rmmclark@yahoo.co.uk Link to comment Share on other sites More sharing options...
doz Posted August 8, 2002 Author Share Posted August 8, 2002 Aves have you got a pic of the bars and do you know where to get them from Thanks andy Link to comment Share on other sites More sharing options...
tgracing Posted August 9, 2002 Share Posted August 9, 2002 Depends on the age of you car. Most std seats just bolt through the floor. There are channels under the floor to reinforce it which should be pre-drilled. The rear bolts require jamming a big screwdriver into the rails as there's b*gger all room to get a spanner on the head. HTH, Davebo C7 CAR Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now