7 wonders of the world Posted November 19, 2009 Share Posted November 19, 2009 Steve, Unless you want to spend a lot of money on braided hose buy the black Aeroquip hose in a roll form think and use the pushfit unions from the same source that way you and fit 1 end and attach to say the pump and measure in 'real time' with the hose before cutting and fiting the other end. If you have several hoses needing a similar location this is often a good way of checking for interference check twice cut once and it avoids expensive mistakes. Link to comment Share on other sites More sharing options...
Unclefester Posted November 19, 2009 Share Posted November 19, 2009 UF Do you have any pics of your install ? Also, do you know the capacity of the kidney tank ? 'Fraid I don't know the capacity but it's well over the CC bellhousing volume. I did post some pix of the belt guard on here but they are time expired. Here's the same again. here here here I'm working on various small batch CF and GRP production moulds at the moment and will be doing moulds for this casing, as it's not viable cutting the things out of solid billet aluminium with a water-jet, which is how this one was made. It actually has a cover on it but it's so clean and transparent you can't see it's there! Lucy in the Sky with Diamonds..ooooh hooo hooo!!... 😬 😬Abbey Road Time-Machine *eek* Edited by - Unclefester on 19 Nov 2009 19:09:39 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now