gonzo77 Posted July 30, 2002 Share Posted July 30, 2002 I've taken the bike engine route, so all of this equiptment is now surplus... Email me if interested at maynard.gonzo@zoom.co.uk Cheers, Alan. 4 off 14”x 6” Minator Rims Ford PCD with tyres (Michelin Pilot 185/60x14) 200.00 Vauxhall injection management system- MBE 956 programmable ECU and loom Manifold, throttle bodies, injectors and air filter. Mapping Box Software 650.00 lot Caterham Vauhall dry sump bell housing 80.00 QED Vauxhall dry sump kit Sump pan 6 port pump Oil tank 6.5 ltr easy clean Bell housing- cable clutch Paddle clutch and cover Alternator to suit 400.00 lot Vauxhall crank- reground 80.00 Vauxhall steel valve spring retainers- approx 10 sets 50.00 Vauxhall exhaust system 2 manifolds trough bonnet type 1 repackable silencer, side exit rear exit silencer with connecting pipe to above silencer. 150.00 lot Pair Vauxhall engine mounts 20.00 Vauxhall to DCOE manifold 40.00 Vauxhall race roll hoop (no brace) 40.00 Cycle wings 5 yellow 4 white (painted) 1 Black 1 Green 5.00 each Rear wings 2 red pair 1 yellow LH 2 green LH 10.00 each 1 heated screen (new) 80.00 LH screen stanchion (new) 10.00 Pair screen stanchions 15.00 FIA boot cover (new) 10.00 FIA brace (new) 10.00 Scuttle 30.00 Rover K engine (wet sump) mounts pair (new) 25.00 Rover K oil filter housing (new) 10.00 Drive shaft LH 15.00 2 sets upper/lower wishbones spherical joint type- std track 30.00 set Numerous std track torsion bars 5.00 each 2 rear torsion bars ½” and 5/8” 15.00 lot LC live axle bench seat set as new. 10.00 GRP race set early type 20.00 Hood (zip out rear window) 30.00 All parts used unless stated otherwise Link to comment Share on other sites More sharing options...
mark shekle Posted July 30, 2002 Share Posted July 30, 2002 Alan, I'd be interested in the (new) FIA boot cover....I assume the poppers haven't been fitted? Regards Mark Link to comment Share on other sites More sharing options...
stevefoster Posted July 30, 2002 Share Posted July 30, 2002 Alan, Have called (message on your mobile) and emailed about the injection system and poss the side exit exhaust. Steve My racing pics here Hants (North) and Berkshire area club site here Link to comment Share on other sites More sharing options...
Morls Posted July 30, 2002 Share Posted July 30, 2002 Just out of interest, which engine are you fitting? Mark Link to comment Share on other sites More sharing options...
Area Representative z7 Posted July 30, 2002 Area Representative Share Posted July 30, 2002 Alan, I'm having trouble with my e-mail but I'll take the FIA brace (new) if it's what I know as a Petty strut, and I'm interested in the FIA boot cover (new). Let me know if it's available still. Cheers Adil Link to comment Share on other sites More sharing options...
philwaters Posted July 31, 2002 Share Posted July 31, 2002 Alan, Steve's mechanic (general dog's body!) here... Can I have the Hood? have sent you mail... Phil Waters Zetec is in and running Edited by - philwaters on 31 Jul 2002 08:43:21 Link to comment Share on other sites More sharing options...
Harry Flatters Posted July 31, 2002 Share Posted July 31, 2002 Alan, very interested in dry sump system, heated screen and stanchions. You have mail. <em>arrow</em><em>arrow</em>Harry Flatters<em>arrow</em><em>arrow</em> AKA Steve Mell Edited by - Harry Flatters on 31 Jul 2002 12:29:07 Link to comment Share on other sites More sharing options...
Harry Flatters Posted July 31, 2002 Share Posted July 31, 2002 Whoops - double post <em>arrow</em><em>arrow</em>Harry Flatters<em>arrow</em><em>arrow</em> AKA Steve Mell Link to comment Share on other sites More sharing options...
philwaters Posted July 31, 2002 Share Posted July 31, 2002 Steve, I was 5 minutes away from mailing you this link for that very purpose! You know yo want it Phil Waters Zetec is in and running Link to comment Share on other sites More sharing options...
Harry Flatters Posted July 31, 2002 Share Posted July 31, 2002 Thanks Phil - great minds think alike!! <em>arrow</em><em>arrow</em>Harry Flatters<em>arrow</em><em>arrow</em> AKA Steve Mell Link to comment Share on other sites More sharing options...
acw Posted July 31, 2002 Share Posted July 31, 2002 I'll take the hood if it's the high viz type. Andrew Link to comment Share on other sites More sharing options...
Tony J Posted July 31, 2002 Share Posted July 31, 2002 Alan You have mail I'll have the screen & stanchions Tony J Edited by - Tony J on 31 Jul 2002 13:07:07 Link to comment Share on other sites More sharing options...
Rob k Posted July 31, 2002 Share Posted July 31, 2002 You Have Mail I Would Like The " Red Rear Wings Rob K Maidstone Edited by - Rob K on 31 Jul 2002 10:49:05 Link to comment Share on other sites More sharing options...
Graeme Smith Posted July 31, 2002 Share Posted July 31, 2002 I'll take the two green LH rear wings and the green front wing - seem to get through them at a rate of knots. Where abouts are you? Or could you bring to Curborough? Graeme Link to comment Share on other sites More sharing options...
olly olsson Posted July 31, 2002 Share Posted July 31, 2002 Alan I am interested in the injection set up please can you call me mob 07778 812021 thanks Adrian Link to comment Share on other sites More sharing options...
kjp Posted July 31, 2002 Share Posted July 31, 2002 Alan you have e-mail Ken Pendlebury KenP Link to comment Share on other sites More sharing options...
Martin H Posted July 31, 2002 Share Posted July 31, 2002 You have mail. I'll have the black front wing (on the assumption it isn't cracked or scuffed). Link to comment Share on other sites More sharing options...
cskip Posted July 31, 2002 Share Posted July 31, 2002 Gonzo, You have mail re: cycle wings - Yellow and Green. You have more stock than Caterham Parts Dept!!!!! Clive. X-flow - Not So Loud, But Still Proud! (Tech-Craft fitted!) Link to comment Share on other sites More sharing options...
KPenn Posted July 31, 2002 Share Posted July 31, 2002 Alan Did you get my e-mail this morning re the wings? Keith Link to comment Share on other sites More sharing options...
Harry Flatters Posted August 1, 2002 Share Posted August 1, 2002 Alan, Did you get my e-mail re screen? <em>arrow</em><em>arrow</em>Harry Flatters<em>arrow</em><em>arrow</em> AKA Steve Mell Link to comment Share on other sites More sharing options...
Willie. Posted August 1, 2002 Share Posted August 1, 2002 Alan, I'd be interested in rear arches. I've sent you an email. Thanks, Willie Wagtail Link to comment Share on other sites More sharing options...
will maskell Posted August 6, 2002 Share Posted August 6, 2002 hi, interested in vaux to dcoe inlet manifold at £40. please e-mail me. regards will Link to comment Share on other sites More sharing options...
Big Brother Posted August 8, 2002 Share Posted August 8, 2002 Alan, Have mailed you re the scuttle. Steve www.Se7en-Up.co.uk Link to comment Share on other sites More sharing options...
pete tudor Posted August 11, 2002 Share Posted August 11, 2002 Could you tell me what diameter standard track front anti-roll bars you have, as I am looking for one between the 3/8 and 5/8 diameters to optimise the set up of my car. Also do they have the bushes? Thanks, Pete Link to comment Share on other sites More sharing options...
AMMO Posted August 12, 2002 Share Posted August 12, 2002 Would like information on the seats. Have emailed you. AMMO Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now