tbird Posted August 31, 2009 Share Posted August 31, 2009 Has anybody swapped the press studs on the windscreen frame for Tenax fittings, if so easy or 🙆🏻 of a job Link to comment Share on other sites More sharing options...
allen Posted August 31, 2009 Share Posted August 31, 2009 Question is, why - I've never had a problem with the press stud fittings - Have to say the tenax fittings are first class and stay closed whatever -thinbk you need a tool to fit the parts to the hood and the male part would need the frame tapping to the right thread nad the frame isn't too thick, so might be a bit tricky. Regards allen allen Link to comment Share on other sites More sharing options...
tbird Posted August 31, 2009 Author Share Posted August 31, 2009 its not to do with having problems its just Tenax fittings are easier than pressstuds to attach quickly, the hood side would be easy but you have reminded me that the male part is a threaded stud,ok into grp but probably a probem into the screen frame, unless a rivnut or similar could be fitted, probably a PITA so may be a non runner Link to comment Share on other sites More sharing options...
Eugene Posted September 1, 2009 Share Posted September 1, 2009 There are lots of different fitting options... LinkyLink Small Boy - with Loud Toy! Co-founder of the BOG Club See Eugene here and see what I do here Link to comment Share on other sites More sharing options...
tbird Posted September 1, 2009 Author Share Posted September 1, 2009 Eugene cheers more food for thought Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now