Squadron Leader Posted August 8, 2009 Share Posted August 8, 2009 A Suffolk Punch cylinder mower for sale. Bought last year and used for one season only. Was described at the time of purchase as 'The Rolls Royce of lawnmowers'.聽 Was serviced this year and had the blade sharpened at the same time. Not been used since and is ready to go. 聽 These are around 拢480.00 to buy new, this one has got to be a bargain at only 拢275.00 Collected from Brackley Northants or from my office near Gatwick.聽 Pic available on request. Spec listed below.聽聽 Suffolk Punch 14SK Features 路 Easy start. 聽 路 Low emission Kawasaki Engine. 聽 路 Rear roller for a striped close cut finish. 聽 路 Removerable QXtm cassette for easier blade sharpening. 聽 路 Suffolk Punch 14SK specification 聽 路 Cutting Height: 5 Heights between 10mm - 35mm 聽 路 Cutting Width: 14 inches / 35cm 聽 路 Engine: Kawasaki 4-stroke 3hp easy start low emission 聽 路 Drive System: Self-propelled 聽 路 3 way drive system - roll, cut or mow 聽 路 Grass Bag Capacity: 32 litres 聽 路 Weight: 38.0kg 聽 路 Make: Qualcast 聽 路 Model: Suffolk Punch 14SK 聽 路 Link to comment Share on other sites More sharing options...
Englishmaninwales Posted August 8, 2009 Share Posted August 8, 2009 What bliss! To be able to sell 2 lawnmowers and not have to cut any grass ever again! Moving to a gardenless flat? 馃槵 Good luck with the sale. Malcolm Link to comment Share on other sites More sharing options...
7Nut Posted August 8, 2009 Share Posted August 8, 2009 Pictures please SL 聽 Stew Link to comment Share on other sites More sharing options...
Squadron Leader Posted August 8, 2009 Author Share Posted August 8, 2009 Stew, e-mail me at rephotopublishingltd@btinternet.com and I'll reply with a pic.聽 Thanks,聽 Phil Link to comment Share on other sites More sharing options...
Frying Pan Posted August 8, 2009 Share Posted August 8, 2009 My dad used to have a Suffolk Punch when I was a kid. We had two huge lawns and I used to love mowing them with it and getting lovely straight stripes 聽 We've just swapped our little Flymo for a Honda propelled jobby, but it's still a rotary so no stripes 鈽癸笍聽 See some pictures of the build here. 16000 miles completed! Link to comment Share on other sites More sharing options...
7Nut Posted August 9, 2009 Share Posted August 9, 2009 Phil YHM聽 Stew Link to comment Share on other sites More sharing options...
Squadron Leader Posted August 9, 2009 Author Share Posted August 9, 2009 Stew, I have replied and sent a pic.聽 Cheers,聽 Phil Link to comment Share on other sites More sharing options...
7Nut Posted August 9, 2009 Share Posted August 9, 2009 Phil YHM聽聽 Stew Link to comment Share on other sites More sharing options...
DaveMorris Posted August 11, 2009 Share Posted August 11, 2009 Phil, question - is this the one where you can change the cassette and fit the scarifier cartridge into ? Would be interested if Stew isn't - so I suppose a second dibs is in order, Dave. Link to comment Share on other sites More sharing options...
7Nut Posted August 11, 2009 Share Posted August 11, 2009 Sold to me today.聽 Stew Link to comment Share on other sites More sharing options...
DaveMorris Posted August 12, 2009 Share Posted August 12, 2009 There goes her early Xmas present then 鈽癸笍. I'll have to think of something else. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now