Phil Morris Posted July 16, 2009 Share Posted July 16, 2009 If buying an Alt.( other than CCars ) rear discs, are they From Triumph spitfire or Ford sierra, or should i get upratted type ? any Ideas, Thanks, Phil Link to comment Share on other sites More sharing options...
The Polisher Posted July 16, 2009 Share Posted July 16, 2009 The rear discs are Triumph Spitfire front discs available from Rimmer Brothers at around £30 + p&p. for the pair. I have a spare brand new pair in my garage which you can have for £25 including postage if you wish. Dave H. Mad about S77ENS Link to comment Share on other sites More sharing options...
Mick Day Posted July 16, 2009 Share Posted July 16, 2009 Standard discs, front & back are Triumph Spitfire. Available from CC or any other good motor factor, for about the same amount of money. However it makes sense to support CC because if we don't.................... Link to comment Share on other sites More sharing options...
bobt Posted July 16, 2009 Share Posted July 16, 2009 Certainly agree Link to comment Share on other sites More sharing options...
Willie. Posted July 16, 2009 Share Posted July 16, 2009 Are there any "standard" fitment discs which are a larger diameter but still fit? Keen to get a larger diameter disc, but not keen to pay £100+, wondering if larger dia discs from another car fit? Are GT6 discs any bigger? Willie Link to comment Share on other sites More sharing options...
Irrelevant Posted July 16, 2009 Share Posted July 16, 2009 What's the point in larger diameter disks They won't fit inside the calipers . . . Link to comment Share on other sites More sharing options...
Ian B Posted July 17, 2009 Share Posted July 17, 2009 Standard disks equivelent are Brake Engineering 815811 available from motor factors for about £28 a pair. Ian - Slightly Vider SVelte model 😬 - Joint AR for North Kent Link to comment Share on other sites More sharing options...
Willie. Posted July 17, 2009 Share Posted July 17, 2009 What's the point in larger diameter disks They won't fit inside the calipers . . . Says who? You, my friend, need to invest in an angle grinder. 😬 I'm thinking more for the front really, and I'd be willing to make a bracket to move the callipers. I think vented discs are unnecessary on the front of a 7, and Hi-Spec's big discs are a bit pricey for my liking...so looking for alternative suggestions. Willie Link to comment Share on other sites More sharing options...
Graham Perry Posted July 18, 2009 Share Posted July 18, 2009 Yes the Vitesse/GT6 discs will fit on the front only as far as I am aware. A small amount thicker and greater diameter. I fitted them as I upgraded to the Alcon calipers and realised a slightly larger disc would fit better. We had to turn the diameter down on a lathe a tiny amount but they have proved totally reliable and have handled any amount of abuse I have given them despite not being ventilated. Edited by - Graham Perry on 18 Jul 2009 08:06:26 Link to comment Share on other sites More sharing options...
Willie. Posted July 18, 2009 Share Posted July 18, 2009 Graham, Thanks for that. I had heard they fitted, but wasn't sure. Do you remember what diameter they are? I have a pair of Hi-Spec callipers, but they're for Cortina hubs (Got them for my Locost), but think I'll machine an adaptor and use them with bigger discs. Hi-Spec do some real tastey big discs, but keen to keep to affordable, standard, parts if I can. Willie Link to comment Share on other sites More sharing options...
Willie. Posted July 18, 2009 Share Posted July 18, 2009 Just did a quick google, sorry...should have before asking. Standard Spitfire/Caterham Solid Disc = 229mm Standard GT6 Solid Disc = 246mm Edited to add: Hi-Spec Sell: 232mm Solid Disc 260mm Solid Disc 280mm Solid Disc - Not listed as their kit The first two of the HiSpec sizes are in their conversion kits for the Caterham, but the 280mm disc is not listed. Apparantly this does, and has been fitted (RST V8 car), perhaps its just too effective on smaller installs, I don't know. Willie Edited by - Opposite Lock on 19 Jul 2009 00:47:57 Link to comment Share on other sites More sharing options...
Graham Perry Posted July 19, 2009 Share Posted July 19, 2009 Willie, If you are changing the rear calipers then its perfectly possible that the GT6 discs can be made to fit although you will need to experiment a little. The basic shape of the GT6 disc is no different to the Herald one though Link to comment Share on other sites More sharing options...
Willie. Posted July 19, 2009 Share Posted July 19, 2009 Graham, Changing fronts, not changing rears. I think the rear is a bit overbraked, or the front under (as standard), so want to make the fronts better and leave the standard rears with decent pads. Willie Link to comment Share on other sites More sharing options...
taffyracer Posted July 19, 2009 Share Posted July 19, 2009 anybody have a ref # for the Spitfire front/rear discs? C7 YUM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now