wild bill Posted July 9, 2009 Share Posted July 9, 2009 Right i've read 7FAQ but still need help I need the size of the engine sump access thread for the OP sensor which MAY be 1/4 npt can anyone confirm this Going by 7FAQ the braided hose thread size at the sump end is 1/8 BSP Edited by - wild bill on 10 Jul 2009 11:22:55 Link to comment Share on other sites More sharing options...
wild bill Posted July 10, 2009 Author Share Posted July 10, 2009 BTTT Link to comment Share on other sites More sharing options...
mav Posted July 10, 2009 Share Posted July 10, 2009 Engine type and age would be a big help Link to comment Share on other sites More sharing options...
wild bill Posted July 10, 2009 Author Share Posted July 10, 2009 My Braiiin My Braiiin Was in previous post but forgot to keep it Duratec 2.3 2009 Link to comment Share on other sites More sharing options...
john milner Posted July 10, 2009 Share Posted July 10, 2009 I think it can vary. My 2003 K series oil filter housing is M12 and my gauge is Stack. I also have an adaptor to 1/8"NPT for the oil pipe gland to go into. Link to comment Share on other sites More sharing options...
Rob Walker Posted July 11, 2009 Share Posted July 11, 2009 It is M12x 1.5mm pitch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now