Leadership Team RogNeedham Posted May 19, 2009 Leadership Team Share Posted May 19, 2009 ..is it possible to do this in situ without removing the exhaust primaries? access looks pretty tight to me from above or below Rog Link to comment Share on other sites More sharing options...
CageyH Posted May 19, 2009 Share Posted May 19, 2009 Yes. I have done it. Only dead fish go with the flow....! Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted May 19, 2009 Leadership Team Share Posted May 19, 2009 So have I Absolute sod of a job though Link to comment Share on other sites More sharing options...
6speedmanual Posted May 19, 2009 Share Posted May 19, 2009 Rog If you have allen head engine mount bolts, they can be accessed by using a 3/8" allen key with the L cut off. The now straight hex rod can be turned with a a 3/8" socket on a long extension from above. Much easier than trying to turn the fixing from deep down in the engine bay in amongst all the header pipes. Peter BRAWNGP green SUPERLIGHT FCITW 2009 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now