The Pikey Posted May 15, 2009 Share Posted May 15, 2009 I have a new (still in the stiched packet) half hood for sale in yellow with black piping. Its for a 96 on arch S3 chassis with a standard rollover bar so should fit the metric one too . As I also had the Softbits boot cover on my car, the side tabs that clip it to the hood poppers were shortened so they fitted to the triangle upright that the hood sticks would normaly bolt to. Although they should still fit, the velcro tabs may not be long enough to join togeather so you might want to replace the straps which is just a case of threading new ones in. You will also need to get a couple of press studs. £95 plus post. Jason Edited by - jason fletcher on 15 May 2009 21:55:39 Edited by - jason fletcher on 16 May 2009 13:12:09 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now