RoyH Posted May 14, 2009 Share Posted May 14, 2009 These are MOG half doors as supplied by Fluke Motorsport. Double-skinned 2 twill to fit a S3 (they were on my 2007 R300). Doors are less than 3 months old and have been on the car four times. They have not been drilled. As I didn’t want to start putting holes in my previous polisher’s dream the half doors were fitted with Velcro strips. This wasn’t very successful and I took them off the car with the intent of fitting a more permanent fastening prior to my major shunt. They weigh about as much as a postage stamp! Total cost from Fluke is £506. Will accept £380 plus p&p. Link to comment Share on other sites More sharing options...
J7HPC Posted May 14, 2009 Share Posted May 14, 2009 Can I have 1st dibs subject to photos please? Rupert Edited: Oh, and if the photo's good, I'll collect with cash as I'm 30 mins from Watford (M25 willing). Edited by - J7HPC on 14 May 2009 11:20:04 Link to comment Share on other sites More sharing options...
RoyH Posted May 14, 2009 Author Share Posted May 14, 2009 That was quick! I would prefer that they were collected anyway; it means you can see exactly what you're getting. If you check this you can see the doors on the Fluke website. The price you see is per door, single skin. Tick the 2 x 2 twill CF option, add the other door, proceed to check-out and it will add VAT and carriage. Comes to £506. Even if you dont want the doors I'll give you a free cuppa and a sarnie 😬 Link to comment Share on other sites More sharing options...
J7HPC Posted May 14, 2009 Share Posted May 14, 2009 It was quick, I've been told you need to be quick to get these things, so just to confirm, apart from the Velcro they're pretty much as new ? If so, I'll arrange a convenient time to come to Watford for a cuppa.... Might have to be next week as this week is a nightmare, is that ok? Rupert Link to comment Share on other sites More sharing options...
peterg Posted May 14, 2009 Share Posted May 14, 2009 An hour, quick? these used to go in minutes if not seconds maybe the market is saturated 😬 Link to comment Share on other sites More sharing options...
RoyH Posted May 14, 2009 Author Share Posted May 14, 2009 Saturated market!!! Errrrmmm.... Yes they are virtually as new. Nice and shiny. You're welcome to have a pic but its only going to show you what you see on Fluke, except not as clearly! The velcro will obviously just clean off, I wouldnt recommend it anyway, bad idea. Happy to give you first dibs, but would prefer to discuss and fix a more definite date/time. I dont want to hold it three weeks and then you decide you dont want it!!!! Want to drop me a quick BM 🤔 Link to comment Share on other sites More sharing options...
J7HPC Posted May 14, 2009 Share Posted May 14, 2009 YHM.... Rupert Link to comment Share on other sites More sharing options...
RoyH Posted May 14, 2009 Author Share Posted May 14, 2009 Reserved for Rupert Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now