Gary Furst Posted May 4, 2009 Share Posted May 4, 2009 I have the following bits for sale Brand New (Still in the Polythene Bags):- Nose Cone in Sapphire Blue £125 Tonneau & Bootcover (Part No 77659 & 73470) £160 Watts Linkage x 1 (Part No 70256A) £15 And the Following are used:- Revolution 4 Spoke Lightweight Race Wheels 6" x 13" (4.75kg) in Black x 6 £300 (inc wets and acb10s listed below) Barnby Magnesium Split Rims 7" x 13" Fronts and 7.5" x 13" Rears £400 (inc slicks listed below) Avon Wets 160/530 R13 (Never used - still have the labels attached) x 4 £100 Avon Slicks (2mm left) 7"/20" R13 x 2 (Order Code 10998) £40 Avon Slicks (2mm Left) 8.2"/22" R13 x 2 (order Code 10999) £40 Avon ACB10 (2mm Left) 7"/22" R13 x 3 £50 Avon ACB10 (2mm Left) 6"/21" R13 x 2 £40 Wide Track RED Front Anti-Roll Bar £20 Postage at additional cost, or delivery to Curborough Club Sprint. I do also have some other X-flow bits such as 2 Engine Blocks (1700cc), Cast Iron Bellhousing, 13 forged pistons (83.5mm), std front uprights (with trunnions), std front brake disks, std open 3.92 diff, etc. Regards Gary Edited by - Gary Furst on 4 May 2009 11:49:38 Edited by - gary furst on 5 May 2009 17:19:47 Mag wheel size corrected down 0.5" Edited by - gary furst on 5 May 2009 19:39:17 Edited by - gary furst on 9 May 2009 16:49:00 Prices reduced on the wheels. Edited by - gary furst on 10 May 2009 20:51:37 Edited by - gary furst on 11 May 2009 18:14:23 SOLD Items removed from list for clarity. Edited by - gary furst on 15 May 2009 18:13:44 Edited by - gary furst on 15 May 2009 18:14:39 Link to comment Share on other sites More sharing options...
chambomg Posted May 4, 2009 Share Posted May 4, 2009 hi can i have first dibs on the front and rear wings please. all the best paul chambomg@aol.com Link to comment Share on other sites More sharing options...
Slider7 Posted May 4, 2009 Share Posted May 4, 2009 First dibs on the half doors please ... Edited to add a few questions/remarks : - I guess the C in '76257CA' is an error, since there only is a '76257A' and not '76257CA' on CC's website ? - Do they come with the fitting kit and if so, are these poppers already fitted to the half doors or not ? - Where are you/they located ? “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Edited by - Slider@7 on 4 May 2009 12:21:14 Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted May 4, 2009 Area Representative Share Posted May 4, 2009 Gary, Barnby Magnesium Split Rims 7.5" x 13" Fronts and 8" x 13" Rears first dibs please, subject to condition and offsets. Do you have photo's of these wheels? What offsets are they? Edited to add:- Do these include wheel nuts? and. what sort of use have they had, and have they been crack tested recently? Edited by - Richard Price on 4 May 2009 12:30:12 Link to comment Share on other sites More sharing options...
Pendennis Posted May 4, 2009 Share Posted May 4, 2009 2nd dibs on Barnby wheels please durabangatskydotcom Ian 07770666356 Want to rent an 18th century Farmhouse in Rural Somerset? Edited by - Pendennis on 4 May 2009 12:55:55 Link to comment Share on other sites More sharing options...
David Lynch Posted May 4, 2009 Share Posted May 4, 2009 Missed out again.... ☹️ Second Dibs on the half doors if Bruno passes. I'll be at Curborough EN Yorks 7's Link to comment Share on other sites More sharing options...
Stuart McGill Posted May 4, 2009 Share Posted May 4, 2009 What sort of car cover is it please? Possible dibs.... Link to comment Share on other sites More sharing options...
Stuart McGill Posted May 4, 2009 Share Posted May 4, 2009 RE: the cover you should have mail. Cheers, Stuart Stuart Link to comment Share on other sites More sharing options...
duh Posted May 4, 2009 Share Posted May 4, 2009 First dibs on the wets,i have e mailed you a couple of questions. Link to comment Share on other sites More sharing options...
Stuart Miller 7 Posted May 4, 2009 Share Posted May 4, 2009 You have mail Best regards Stuart Link to comment Share on other sites More sharing options...
Gary Furst Posted May 5, 2009 Author Share Posted May 5, 2009 Paul - You have first dibs on the wings - mail sent. Richard - Your first on the Barnby wheels - They are most recently off my Blackbird 7 De-dion they were on my X-Flow de-dion beforehand. I will need to measure the offset. The come with the wheelnuts but they haven't been crack tested. I'll try to send some photos via blatmail but it might be best to e-mail me direct with you contact mail. Other mailers replied to as well. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted May 5, 2009 Area Representative Share Posted May 5, 2009 Gary, You should have BlatMail. If not, please contact me via email. My address is in my profile. Link to comment Share on other sites More sharing options...
Slider7 Posted May 5, 2009 Share Posted May 5, 2009 Missed out again.... ☹️ Apparently that makes 2 of us who missed out ☹️ ☹️ ☹️ “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Edited by - Slider@7 on 5 May 2009 20:58:09 Link to comment Share on other sites More sharing options...
LesG Posted May 5, 2009 Share Posted May 5, 2009 If the Xflow blocks and pistons haven't already gone, can you mail me some details please? Link to comment Share on other sites More sharing options...
techbod Posted May 5, 2009 Share Posted May 5, 2009 If the 5 speed gearbox is still available- can you email me some details (price, is it from xr4i or otherwise, does it have long input shaft etc) Also if all the forged pistons don't get taken I'm interested in a set of 4 depending on price. Thanks Link to comment Share on other sites More sharing options...
Gulfb Posted May 8, 2009 Share Posted May 8, 2009 Good evening Garry, Why dont you let Slider have the doors he seems to have got himself rather worked up and I wouldnt want you to have any hassle. Obviously if he passes on his "first dibs" then let me know. Link to comment Share on other sites More sharing options...
Slider7 Posted May 8, 2009 Share Posted May 8, 2009 Not necessary Gulfb ... but I do appreciate the gesture. Enjoy your half doors. “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Link to comment Share on other sites More sharing options...
Gary Furst Posted May 11, 2009 Author Share Posted May 11, 2009 BTT Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now