Slider7 Posted April 14, 2009 Share Posted April 14, 2009 Currently running 13" wheels with 185/60/R13 Yoko 021's (standard 1.6K SS). Basically I'm happy about this setup but am changing to R300 spec engine in May, so want to upgrade the rears to 205's. Would the 205/60/R13 Yoko 021's fit on my 13 X 6 wheels ... or do I need 13 x 8 wheels for the rear ? Wheels are the older KN Minator ... not new 8 spoke style jobbies. TIA “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Edited by - Slider@7 on 14 Apr 2009 21:56:30 Link to comment Share on other sites More sharing options...
davedlr Posted April 14, 2009 Share Posted April 14, 2009 I've gone the same route, although I use Toyo R888 tyres instead. 205/60/13 fit fine on my rear 13x6" minator wheels. The only difference might be that my car is live axle compared to your de dion rear - I'm not sure if your chassis mountings are any closer to the tyre than mine? cheers Dave Link to comment Share on other sites More sharing options...
Jason Plato Posted April 14, 2009 Share Posted April 14, 2009 13x6 are fine slider but the sidewalls can feel a bit woobly if you know what I mean. here is my Duratec R .... C7 TOP Taffia joint AO with Al Link to comment Share on other sites More sharing options...
Doug Posted April 14, 2009 Share Posted April 14, 2009 I'm currently on 6J wheels all round with 185 60 13s on the front and 205 60 13s at the rear. I believe 7J rims would be better for the 205s, giving a firmer side wall but I'm perfectly happy with the current set up. When I can afford to change to black 8 spokes maybe I'll make the change then 'Have you any idea what it's like to have the wind rushing through your hair!' (Quote:Sq Cdr the Lord Flashheart) Link to comment Share on other sites More sharing options...
Johnty Lyons Posted April 14, 2009 Share Posted April 14, 2009 I run 13 by 205 888s on the rear on 8" Rims Handles superbly No Flex 😬 jj N.I. L7C AR 🙆🏻 Membership No.3927. 240BHP 1900cc K Series 40th Anniversary Link to comment Share on other sites More sharing options...
Slider7 Posted April 14, 2009 Author Share Posted April 14, 2009 Cheers for the info / advice One more thing : Just looked in the DT catalogue where the O21's are listed ... for the 205/60/R13 they state the following : - Spec rim : 6 - Permitted : 6B - 6.5J Does this mean that you can't fit them on 13x8 or even 13x7 rims “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Edited by - Slider@7 on 14 Apr 2009 22:21:55 Link to comment Share on other sites More sharing options...
rj Posted April 15, 2009 Share Posted April 15, 2009 Bruno, They can be fitted to an 8.5" rim, but the tyre fitter may hate you. Link to comment Share on other sites More sharing options...
Slider7 Posted April 16, 2009 Author Share Posted April 16, 2009 OK, thanks RJ ... so a 7" rim shouldn't be a problem then “Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away” Antoine de Saint Exupery Flanders AO - l7C.flanders.ao@telenet.be Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now