Nov-07 Posted March 29, 2009 Share Posted March 29, 2009 Can any member kindly supply me with photos of the CRB replacement process (1800K VVC), showing the installation of the new CRB and the clutch release arm 🤔 After 18k miles the strange sounds from within suggest that a change is required Link to comment Share on other sites More sharing options...
Englishmaninwales Posted March 29, 2009 Share Posted March 29, 2009 If you send me a blatmail I can email you photos of the CRB, bellhousing, release arm and gearbox nose. Malcolm Link to comment Share on other sites More sharing options...
Normans_Ghost Posted March 29, 2009 Share Posted March 29, 2009 I hope you realise that the engine has to come out to change the release bearing. If you need photos I suspect you don't and should be taking the car to a mechanic. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here You and your seven toThe French Blatting Company Limited Link to comment Share on other sites More sharing options...
Nov-07 Posted March 30, 2009 Author Share Posted March 30, 2009 Norman, You have not been reading Blatchat ❗ 😬 The engine, apparently, does not have to come out completely. However, I plan to remove it so that I can carry out other minor works at the same time. It would probably be good to renew the cam-belt while it is easily accessible. The annoying thing is that the engine was out very recently, when CC repaired my car after it was squashed by MR P*** of Wing *evil* I could have asked CC to replace the CRB then, but it was not howling then 😔 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now