dumyat Posted July 5, 2002 Share Posted July 5, 2002 Looking for advice on modifications that need to be made to a standard 1800cc sump. Diagrams would be helpful. Cheers Arch Link to comment Share on other sites More sharing options...
Peter Carmichael Posted July 5, 2002 Share Posted July 5, 2002 Are you talking about the cast aluminium Caterham sump? Problem is that it is pretty shallow and full of the bottom of the engine because of the K's sandwich construction. I don't know that anybody has successfully achieved very much with it. Most efforts concentrate on dealing with the after effects of inevitable surge - Apollo tank. Peterid=teal> 253 BHP K-seriesteeth.gif, gearbox and diff on the waythumbsup.gifid=red> Link to comment Share on other sites More sharing options...
dumyat Posted July 6, 2002 Author Share Posted July 6, 2002 Peter, Thanks for the advice, I will put my welding mask away and take out my wallet. Link to comment Share on other sites More sharing options...
dumyat Posted July 6, 2002 Author Share Posted July 6, 2002 Peter, Thanks for the advice, I will put my welding mask away and take out my wallet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now