Garibaldi Posted November 6, 2008 Share Posted November 6, 2008 Time for a bit of a clear out… Need the space… and the cash..!! Quaife 6 Speed Helical Overdrive Sequential HQBE26Z6H with alloy maincase. Fitted with Caterham specific gearlever and 3 bolt front bearing cover for hydraulic clutch. Also std cover for manual clutch. Fresh from rebuild/service at Quaife (receipted). £2650 SOLD Brand new, unused (un-cut wires) Quaife branded LED gear position indicator for above. £100 SOLD Radtech alloy rad. for S3 – direct replacement for std. £120 SOLD DAVE Rear AP 2 pot brake callipers ready to fit with hub spacers, solid disks (used), pads (used), + handbrake callipers, mounting flanges and bolts. Also 2 pairs De-dion ears for above, 1 std unmarked and 2nd set marked 0.25deg. £300 lot SOLD IAN Pace DS pan with scavenge hoses for 2Lt Vx. £100 SOLD CC Stainless std battery tray. £15 SOLD MARK Bespoke Stainless battery tray (similar style to above) to mount RedTop etc. £40 Caterham yellow nose cone for post 96 chassis (needs polish & TLC). £45 SOLD HUGH Set of 4 Bosch 803 (dark green) high flow injectors. Serviced/cleaned and bagged a couple of years ago but not fitted again. (from 250+ bhp Vx) £100 OMEX Shift Light Pro single LED programmable shift light (used but long wiring tails) £40 1st dibs TYRONE STD Radiator Fan £25 Set of 4 48 x 90 Alloy induction trumpets (fit Jenvey TBs) £40 All prices are plus P&P though some items probably best collected. Also some items advertised elsewhere. There is more… Including a 7.5” BTB Stainless/Carbon exhaust can… I just need to dig it all out..!!! If interested Blat mail me or phone 01403 782889 or 07968 849875 (Sussex based) Cheers Gary Edited by - Garibaldi on 11 Nov 2008 17:34:03 Edited by - garibaldi on 4 Dec 2008 09:25:34 Link to comment Share on other sites More sharing options...
graham bass Posted November 6, 2008 Share Posted November 6, 2008 Will the alloy radiator suit my crossflow? If so first dibs and maybe exhaust can subject to it being the right size/dimensions and condition please. Regards Graham Link to comment Share on other sites More sharing options...
davef Posted November 6, 2008 Share Posted November 6, 2008 2nd dibs on the radiator pls. Thanks Dave Link to comment Share on other sites More sharing options...
Pendennis Posted November 6, 2008 Share Posted November 6, 2008 I'll have the rear AP 2 pot calipers, discs, pads and ears as discussed. Cheers I will be in touch. regards Ian 18th century Farmhouse in Rural Somerset to let Edited by - Pendennis on 6 Nov 2008 17:50:36 Link to comment Share on other sites More sharing options...
Garibaldi Posted November 6, 2008 Author Share Posted November 6, 2008 Graham 1st dibs on rad... My Vx originally had the copper Rad that was std fitment in he mid 90s which was replaced by the CC alloy rad which, in turn, this rad replaces.... I do not know if the Crossflow was originally fitted with the same rad as the Vx... Any crossflow experts out there...????? Dave 2nd dibs on the rad... Ian... All the Brake parts are ready for your collection... Cheers Gary Link to comment Share on other sites More sharing options...
Tyrone Posted November 7, 2008 Share Posted November 7, 2008 Gary, is the OMEX single or twin coil? If it's twin coil, I'll have it. NE Area Rep Though cowards flinch and traitors sneer, We'll keep the red flag flying here Link to comment Share on other sites More sharing options...
rj Posted November 7, 2008 Share Posted November 7, 2008 Out of curiosity: Could I have more details about the 'box? /regin Link to comment Share on other sites More sharing options...
Garibaldi Posted November 7, 2008 Author Share Posted November 7, 2008 Tyrone Spoken to Tweeks and the manufacturer and have been assured the OMEX will opperate with Twin coils... RJ Will Blatmail you some more info for the box.... Link to comment Share on other sites More sharing options...
Garibaldi Posted November 7, 2008 Author Share Posted November 7, 2008 Graham I have been told by CC the Crossflow rad is not directly interchangeable with the Vx/K rad as the inlet/outlets are a larger diameter on the Crossflow... you would need tapered hoses...?? Cheers Gary Link to comment Share on other sites More sharing options...
alan c Posted November 7, 2008 Share Posted November 7, 2008 I fitted a radtech radiator into my 93 HPC with no problems, it was originally purchased to go in my previous XFlow. Hose diameters all appear to be the same. Its been running like this now for a few thousand miles with no problems. I might be interested in the sump but what else would I need - pump, tank, hoses anything else. Does the dry sump gain you any clearance under the car, I have heard it doesn't Alan Link to comment Share on other sites More sharing options...
Tyrone Posted November 7, 2008 Share Posted November 7, 2008 Gary, I've had a look at the Omex site and you are spot on. I just need to search for connection to Ford coil pack, but it's looking good. NE Area Rep Though cowards flinch and traitors sneer, We'll keep the red flag flying here Link to comment Share on other sites More sharing options...
h_____ Posted November 7, 2008 Share Posted November 7, 2008 had a query on the nose cone, YHM. Link to comment Share on other sites More sharing options...
paul cardy Posted November 7, 2008 Share Posted November 7, 2008 Hi Do you know if the gearbox would be suitable for 260 bhp what engine was it fitted to ? Link to comment Share on other sites More sharing options...
Alba 7 Posted November 8, 2008 Share Posted November 8, 2008 Gary, Interested in the dry sump pan. Any photos available to show condition? Nick. Link to comment Share on other sites More sharing options...
graham bass Posted November 10, 2008 Share Posted November 10, 2008 Gary, I'm not sure about the rad inlet pipe sizes and haven't been able to ascertain whether or not it is a direct swap so I'll pass on this thanks though I am still interested in the silencer but I'll call you about that. Dave F all yours..... Thanks Graham Link to comment Share on other sites More sharing options...
markc Posted November 11, 2008 Share Posted November 11, 2008 Please can I have the Std battery tray Could you let me have the dimensions of it Many thanks MarkC Link to comment Share on other sites More sharing options...
I reply to every thread Posted November 11, 2008 Share Posted November 11, 2008 Can I have the rad and trumpets if still available please? Link to comment Share on other sites More sharing options...
Area Representative marcos59 Posted November 20, 2008 Area Representative Share Posted November 20, 2008 Garry, YHM regarding gearbox Link to comment Share on other sites More sharing options...
Area Representative marcos59 Posted November 21, 2008 Area Representative Share Posted November 21, 2008 Garry YHM2 regarding box Link to comment Share on other sites More sharing options...
Area Representative marcos59 Posted November 22, 2008 Area Representative Share Posted November 22, 2008 Gary, YHM3 regarding box Link to comment Share on other sites More sharing options...
Area Representative marcos59 Posted December 2, 2008 Area Representative Share Posted December 2, 2008 Sold ?!?!?!?! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now