Jump to content
Click here if you are having website access problems ×

Duratec 54mm throttle bodies


dannylt

Recommended Posts

The induction system consists of 2 pairs of Jenvey tapered 54mm throttle bodies on a ported one-piece cast intake manifold. There is be a backplate kicking about as well, but given the various holes in it, it best used as a template. I also have two sets of trumpets that came with it, one in carbon, one in ali. It was set up to have standoff injection into the trumpets, but I believe it should be straightforward to put injectors into the bodies instead - which is what I would recommend now! Well over £1k new, but open to reasonable offers. I now have a set of DTH RaceCo 54mm non-tapered throttle bodies, but they have very similar characteristics. The throttle bodies have made >300bhp on several engine specs, and are probably more suitable for fairly highly tuned engines.
Link to comment
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...