De-wessex Posted June 17, 2002 Share Posted June 17, 2002 Wonder if anyone can help. I have 2002 Classic Live Axle with 1800 vauxhall fitted. I have Yokohama A032R's fitted and car is set up to factory settings (Doubled checked this week). There is nothing to indicate from driving the car to suggest tracking is out. BUT....the near side front tyre is showing a one inch wear ring already on the outer edge after only 750 miles. Can anyone throw any light on why this may be happening? Thanks Link to comment Share on other sites More sharing options...
Graham Sewell Posted June 21, 2002 Share Posted June 21, 2002 Only thing that I can think of is incorrect camber, but this isn't normally adjustable on live axle cars. Otherwise, you are just taking corners too fast and rolling the tyre onto the outside edge wink.gif Cheers, Graham Low tech luddite - xflow and proud! Link to comment Share on other sites More sharing options...
De-wessex Posted June 21, 2002 Author Share Posted June 21, 2002 Thanks for the comments Graham, The car has only done 600 miles and still being run in so I am not exactly putting the car through its paces. I have had the tracking checked (again) today and it is shown as being as per recommended. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now