Stuart McGill Posted October 17, 2008 Share Posted October 17, 2008 I'd like to change the brake fluid on my 7. Being a bit of a mechanical muppet (but learning quickly) can anyone please give me a quick run through on how to do this. I've searched through but can't any previous posts, presumably because its fairly straightforward (famous last words). Cheers Stuart p.s. I've not got a good track record for bleeding coolant systems! Link to comment Share on other sites More sharing options...
jingars Posted October 17, 2008 Share Posted October 17, 2008 Half an answer from Myles' website Link to comment Share on other sites More sharing options...
shn7 Posted October 17, 2008 Share Posted October 17, 2008 Buy an Eezibleed from Halfords or the likes and some brake fluid. Start at the caliper furthest from the master cylinder and work to the closest making sure you keep the MC topped up. Steve. Sussex (West) AR Not forgetting Percy the Polar Bear Link to comment Share on other sites More sharing options...
Roadsport06 Posted October 17, 2008 Share Posted October 17, 2008 One of my winter jobs too, should I pump all of the old stuff out first and start from scratch? BRG and Yellow nose now with added brooklands Link to comment Share on other sites More sharing options...
Bricol Posted October 17, 2008 Share Posted October 17, 2008 Nope. As mentioned buy an easibleed, or rope in g/f, b/f, mum, dad, the teenage girl from next door with the lonng legs . . . Check all bleed nipples are free to turn - nip them back up again. Remove all bleed nipple covers. Remember to replace them (which is what I need to do after replacing a brake pipe on Debs Rover this evening after it failed it's MOT this afternoon .. ) Follow easibleed instuctions to connect it - if unsure, wrap the lot in a towel etc to contain any pressurised leaks. I like to have at least a litre of new fluid, normally two, just in-case. Once opened, brake fluid starts to absorb water from the atmosphere, so don't open a new bottle if you don't need to - that's why they are foil sealed. And don't use the remnants in that old bottle kicking around in the garage - and don't use the stuff you bleed out. Crack open bleed nipple furthest from master cylinder - on a Caterham it's probably 6 and half-a-dozen as to whether n/s or o/s is furthest. Only needs a turn at most - catch fluid in suitable container, possibly with use of a bit of tube on nipple. Let fluid run until it comes out clean - it will be obvious if your's has been in a while. Occasionaly nip nipple up and check for fluid in easibleed. Move to next nearest and work round the car, ending up with drivers side front. Same principle applies to any car - but watch for dual circuits with separate bleeds, or two bleeds on one caliper, or bleed nipples on brake balance valves etc. With tintops, you normally have to make sure the rear suspension is at least at normal height to stop the balance valve closing off the rear brakes to some extent. Can be done with the "up" . . . "down" . .. technique - you under the wheelarch with the spanner, aforementioned lonng legs on the pedals - you shout "down", lonng legs depress pedal - open the nipple . . .close it after fluid comes out - shout "up" - lonng legs come off pedal "down" . .. lonng legs depress pedal, you open nipple .. etc Whatever car, I do normally find to get a decent pedal I end up with a round of the above after easibleeding - normally leave the easibleed connected to maintain fluid levels as I do it. Theoretically, the manual up.down method can lead to wreck master cylinder seals as you stoke them past their normal travel, over possibly corroded sections of the master cylinder - only time I have ever come across it was when the guy who serviced my integrale claimed to have done so, so had to fit a new (exopensive) master cylinder . . . read into that what you like . . . Bri Link to comment Share on other sites More sharing options...
TomB Posted October 17, 2008 Share Posted October 17, 2008 Its dead easy with an easy bleed & spare wheel, as said above. If you want to come round to mine & collect Stu's box of black rivets over the weekend, we could do it then as Ive got an Easy bleed & the spanner for the bleed nipple. Edited by - TomB on 17 Oct 2008 21:54:54 Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted October 17, 2008 Share Posted October 17, 2008 As mentioned above - do watch for leaks from the cap of the Ezi-Bleed under pressure, as the M/C is kept topped up by the brake fluid you put in the pressurised bottle of the Ezi-Bleed. I was so busy watching things at the calipers that I didn't see the monstrous leak from the cap of the master cylinder 😳 ... nasty stuff, brake fluid ! Link to comment Share on other sites More sharing options...
Graham Perry Posted October 17, 2008 Share Posted October 17, 2008 On my seven I always give them another quick bleed after a couple of hundred miles to remove the last of the air. Gets a really firm pedal that way Link to comment Share on other sites More sharing options...
The Polisher Posted October 18, 2008 Share Posted October 18, 2008 A handy tip to help save that pool of fluid on the floor when the snake like piece of tube attached to your nipple flirts out of your catch bottle as you are busy with spanner..........find a nut or two that will screw onto the end of the plastic pipe to act as a weight to hold it at the bottom of the catch bottle. Dave H. Mad about S77ENS Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 22, 2014 Share Posted March 22, 2014 Just about to change the fluid. Always done it manually before. Please could I have recommendations on gadgets that help. I'm currently looking at a Gunson Eezibleed at £16.92. Thanks Jonathan Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 22, 2014 Share Posted March 22, 2014 That's the one JK. Don't put any fluid in the bottle though. If you have an air leak, it will spray everywhere. I know this ! I also have a captive hose in a bottle ...... to put on the nipples. Keeps it all clean and helps with the one man operation. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 22, 2014 Share Posted March 22, 2014 Thanks. If you keep the pressure vessel dry do you top up the reservoir by eye as needed? (I can't imagine any other way... ) Jonathan PS: What pressure were you were using when it blew? Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 22, 2014 Share Posted March 22, 2014 Yes. Disconnect from the wheel and remove the cap from the MC to top up with fluid. I had released pressure from the tyre to that recommended for the EziBleed. The cap on the MC wasn't quite sealed and it emptied the reservoir bottle. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 22, 2014 Share Posted March 22, 2014 Thanks Jonathan Link to comment Share on other sites More sharing options...
Smiffy69 Posted March 24, 2014 Share Posted March 24, 2014 Is there a way of colouring the new fluid to know that it has come through. Otherwise how do you know new fluid has come through ? Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 24, 2014 Share Posted March 24, 2014 I think the recommendation is to drain first, then look for the air gap. But is there a smarter way? AMENDED: See subsequent comments in this thread. Jonathan Edited by - Jonathan Kay on 24 Mar 2014 11:06:16 Link to comment Share on other sites More sharing options...
mav Posted March 24, 2014 Share Posted March 24, 2014 I can usually see the difference between old and new with std fluid. If you test the set up first you should be able to fill the bottle with fluid to save having to disconnect everything every 30 seconds or so to top up the mc reservoir. Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 24, 2014 Share Posted March 24, 2014 Difference old to new is clearly visible ! Best not introduce more air to chase out. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 24, 2014 Share Posted March 24, 2014 Thanks x2. And thanks for asking, Smiffy69. Jonathan Link to comment Share on other sites More sharing options...
Smiffy69 Posted March 24, 2014 Share Posted March 24, 2014 There is a blue version of DOT4 fluid which looks like it could make life easy here Anyone used this ? any good ? Link to comment Share on other sites More sharing options...
Grim Reaper Posted March 24, 2014 Share Posted March 24, 2014 Yes, they also do the same spec in a gold colour so it's easy to see flush through when changing fluid out. Link to comment Share on other sites More sharing options...
Smiffy69 Posted March 26, 2014 Share Posted March 26, 2014 Here's a question for you all .... I bought some of the ATE super blue racing brake fluid so I could flush the brakes and know I had got rid of the old fluid. Good plan thinks I until I read the front of the can and it says "not for use in motor vehicles used on public highways, streets or roads. Due to non conforming colour" Now that's the first I have ever heard of the colour of your brake fluid causing a problem. Also what's the probability of it being a real issue ? Anyone ever fallen foul of wrong colour brake fluid during an MOT? Link to comment Share on other sites More sharing options...
Smiffy69 Posted March 27, 2014 Share Posted March 27, 2014 Been doing a bit of Googling this morning and think this is only applicable in the US as all the hits are about US Federal rulings and can't find anything referencing the UK. So panic over I think Link to comment Share on other sites More sharing options...
Simon Owen Posted March 27, 2014 Share Posted March 27, 2014 Hi Stuart Have you sold the Porsche and got a new 7 then 🤔 🤔 🤔 Link to comment Share on other sites More sharing options...
TomB Posted March 27, 2014 Share Posted March 27, 2014 Si - check the dates! Holy thread resurrection! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now