M.Smith Posted June 12, 2002 Share Posted June 12, 2002 FORD 7" AXLE REBUILT BY KENRICK MOTORS (north west caterham agents). VISCOUS LSD, WITH NEW 4.1:1 CWP. SUPERB CONDITION £700 MARK 01691 831 169 Link to comment Share on other sites More sharing options...
hypoid 90 Posted June 13, 2002 Share Posted June 13, 2002 Is it 4 or 5 speed, long input shaft or short? hypoid 90 Link to comment Share on other sites More sharing options...
Tonycaterham Posted June 13, 2002 Share Posted June 13, 2002 Eh? It says it an axle!!! Link to comment Share on other sites More sharing options...
mark4newman Posted June 13, 2002 Share Posted June 13, 2002 What colour smile.gif Link to comment Share on other sites More sharing options...
smurfy Posted June 13, 2002 Share Posted June 13, 2002 Is the decimal point in the wrong place ? Link to comment Share on other sites More sharing options...
Tonycaterham Posted June 13, 2002 Share Posted June 13, 2002 If this is a Ford 'live' axle then may be a bit pricey but I am building one up which will cost around this figure. TranX diff alone was over £400, then arch motors mods to axle £150 and so it goes on, but think £7,000 would be too much. Tony Link to comment Share on other sites More sharing options...
Tonycaterham Posted June 13, 2002 Share Posted June 13, 2002 Just noticed M Smith's email address is westfield7@.... so worth checking what car it is for. Link to comment Share on other sites More sharing options...
M.Smith Posted June 13, 2002 Author Share Posted June 13, 2002 just to clarify it is a sierra 7" diff as fitted to independant cars Link to comment Share on other sites More sharing options...
hypoid 90 Posted June 13, 2002 Share Posted June 13, 2002 and de dion you hope welsh boy Steve Davies Link to comment Share on other sites More sharing options...
felix.klauser Posted June 15, 2002 Share Posted June 15, 2002 Isn't the viscous diff a 7.5" and with different mounting points and driveshaft conections than the 7" in a Caterham? If so, good as it might be, it won't be a straight-forward swap into a Caterham. Link to comment Share on other sites More sharing options...
M.Smith Posted June 16, 2002 Author Share Posted June 16, 2002 both the 7" and the 7.5" had viscous lsd's fitted but they are not the same diff, this one is the 7" type B, with lobro joints. Link to comment Share on other sites More sharing options...
felix.klauser Posted June 16, 2002 Share Posted June 16, 2002 Do the driveshafts slide in or bolt to external drive flanges? Link to comment Share on other sites More sharing options...
M.Smith Posted June 17, 2002 Author Share Posted June 17, 2002 as i said type b lobro joints flange mount Link to comment Share on other sites More sharing options...
hypoid 90 Posted June 18, 2002 Share Posted June 18, 2002 mmmmmmmmmmmmm flange !!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now