Geoff Wilcx Posted August 27, 2008 Share Posted August 27, 2008 After yesterdays small senior moment of placing in the "Sales Section".....Ooops *biggrin*SORRY I'm on the look out for#:= Solid Cams for VVC - nothing too radical for now as for first build I want to keep with standard followers. Forged Pistons annd Rods. Or any other interesting K pieces or constructive advice. Having got a couple of clean 1.8 EU3's one standard one VVC I'm setting down to plan my winter project - I've stripped the standard engine and having seen how clean it was I wished I'd left it intact hey ho and therefore I'm thinking of dropping the other VVC unit (from same source) in with the minimum of work so I can get a feel of the power that it will deliver comparied to my current bog standard 1.6. This will allow me to think about how far and how strong I need to re-build the bottom end of the one just striped which will eventually become my final engine. www.geoffwilcoxphotography.co.uk Edited by - geoff wilcx on 27 Aug 2008 17:34:31 Link to comment Share on other sites More sharing options...
SimonMac Posted August 28, 2008 Share Posted August 28, 2008 Hi Geoff, if you're not in a hurry I will have a complete set of R500 roller barrel TBs (including linkages, trumpets, back plate etc) available in a couple of months time. Cheers Link to comment Share on other sites More sharing options...
Geoff Wilcx Posted August 28, 2008 Author Share Posted August 28, 2008 Thanks - I've sent you email - Could be very interested...depending upon cost? If you can return an email to me....Thanks www.geoffwilcoxphotography.co.uk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now