1.8k DVA Head & Scholar block combo 207bhp

[David M]

I was going to fit this to my seven but with the first nipper on the way its a stereotypical plan change

 

Great Winter Project!!!

 

This engine was built by Dave Andrews, rolling roaded by Dave Walker at 207bhp.

 

The original build was a no expense spared upgrade with the following spec:

 

- Scholar 1800 block

- Accralite forged pistons

- VHPD rods

- VVC head fully ported

- VVC solid cam conversion

- Piper verniers

- BP285H cams

 

Its the combination of the Scholar block and Dave Andrews pedigree that give the value here.

 

Price:£2500

 

David M

 

GF04RCE.... every day is a Caterham day!!!! He heee!!... pictures here.

[david nelson]

Any more info? How many miles since it was built? has it a vhpd crank?

 

Thanks

[Tonycaterham]

David,

 

would you consider splitting? I'm interested in the block, pistons and rods.

 

Regards

 

 

Tony

 

Tony

 

L7 EVL

[David M]

Some more background

 

DVA built the engine in August/September 2005 and the car did about 7k miles since then. It was done on a replacement head basis, using a VVC head and the Pipercross conversion kit.

 

What I am offering includes the Caterham engine Sump, scholar block, VVC head (and all components within), distributor/coil or dual coils, pipercross verniers, flywheel, clutch&plate, no alternator or starter motor. Basically the full engine but without the ancillaries.

 

The crank is standard but was probably re-balanced with the engine build.

 

Tony,

I would only consider splitting block from head if I was sure to get an equivalent amount for the full set. If you can team up with someone who is interested in the head and work out the split between you I'll happily split it that way.

 

David M

 

 

GF04RCE.... every day is a Caterham day!!!! He heee!!... pictures here.

[David M]

 

 

 

GF04RCE.... every day is a Caterham day!!!! He heee!!... pictures here.