Miff Posted June 3, 2002 Share Posted June 3, 2002 i am trying to assembel the diff/propshaft assembly bu t i have a ford/vauxhall spec driveshaft (643 mm) rather than a rover one (~700 mm). the car is a de-dion with the vhpd engine - which is the correct size for this? The manual says i should have the longer one, but given the reliability of the manual do i actually have the right one? cheers Link to comment Share on other sites More sharing options...
Miff Posted June 3, 2002 Author Share Posted June 3, 2002 apologies for spelling but being the jubillee have had a few Link to comment Share on other sites More sharing options...
Fred Posted June 3, 2002 Share Posted June 3, 2002 THE DRIVE SHAFTS FOR YOUR CAR ARE PASENGER SIDE DL1684+DRIVER SIDE DL1685 THIS IS CATERHAM PART NO FOR FORD DE-DEON HOPE THIS HELPS HAVE FUN teeth.gif fredid=blue> eek.gif Link to comment Share on other sites More sharing options...
Charlie7 Posted June 3, 2002 Share Posted June 3, 2002 The book is wrong - I spoted the same mistake in the manual, use the 645mm for the Rover. Link to comment Share on other sites More sharing options...
Miff Posted June 3, 2002 Author Share Posted June 3, 2002 Cheers, good old manual, wrong again! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now