Jump to content
Click here if you are having website access problems ×

xf / BDR alternator ?


KayTee

Recommended Posts

Hello, everyone !

 

Are the alternators identical on the factory-supplied BDR and x-flow cars ? The mounting bracket for the BDR is extended towards the front by about 1".

 

Which models were used on either of these engines ?

I need one where the bottom fitting consists of two tabs instead of one solid long lug.

 

Any pointers to manufacture and model number ?

Which other models habe been tried successfully on BDx-es ?

 

THANKS !!

 

Bye - Karsten

Link to comment
Share on other sites

I use a Lucas LAR100 3-wire alternator on a Twin Cam with a 711M block and a standard pulley. It produces about 35A and seems fine.

 

They cost about £25 and I didn't need an exchange.

 

I intend to fit a 3 wire Nippon Denso in the next few weeks as they are much smaller.

 

My local alternator supplier will get a 50A unit for about £60. I will need to make brackets and pulleys but it should be a good weight saving.

Link to comment
Share on other sites

I'll have a look at mine, not sure on the bracket but it was supplied as a BDR from new. My alternator is a late escort version, smaller than the original although not chosen for lightness (only one they had for that mount) and was £25 on exchange. Can't get answer till Monday though.
Link to comment
Share on other sites

THANKS a lot for oyur replies !

 

I'll have a look around. Quick call to the Bosch guys revealed that they'd do exchange fo about 55, brand new for 120 ... That being UKP !

 

Hmm ! Well, there will be a scrappie who's got one, I'm sure ...

 

Thanks again & all the best - Karsten

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...