Mike C Posted May 28, 2008 Share Posted May 28, 2008 In order to fit wider rear wheels to my HPC, I've had to disconnect the anti roll bar links. This is the system where the bar runs on top. What is the best mod for handling? Do i fit an underslung bar, leave it disconnected or reverse the links so that they connect to the inside of the bar and give a little more room? Thanks Mike Mike C No longer K9 JPE Link to comment Share on other sites More sharing options...
Dickie Normuss Posted May 28, 2008 Share Posted May 28, 2008 Most people, me inlcuded, move the drop links to the inside. Quick fix VX HPC - Loud and proud here Watch out, whatever hits the fan will not be distributed evenly Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted May 28, 2008 Support Team Share Posted May 28, 2008 Reverse the links and use washers to make sure that none of the thread sticks out from the nut to give the maximum clearance. Keep an eye on the tyres as under very high corner loadings the ARB can still touch the tyre. I have just fitted 235 rear tyres and it seems OK - will find out for sure at Pembrey this weekend. Yellow SL #32 - member of Drowned Rat Racing Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted May 28, 2008 Share Posted May 28, 2008 Best mod - get Arch to fit the bosses for an underslung bar. The overslung one can fail and the arm can then puncture the fuel tank - happened to me and at least one other. ----- VDU 7X Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now