tiddy1 Posted April 18, 2008 Share Posted April 18, 2008 standard 1.6 K-series engine including inlet manifold and throttle body , £150 Caterham wet sump £100 (a few scrapes but good condition) 4-1 long primary exhaust,(primaries and collector) 2 lambda probe mounting points, not for the polishers (a few dents) but gave a good 210BHP £250 2 clutch cables 1 new, one used but new condition £20 each 1 X flow clutch cable 1 new, one used but new condition £15 each AP clutch, cover and plate, good condition £60 Piper inlet cone filter £10 wet sump engine mounts (pair) £30 Starter Bosh race unit £100 (needs different spacer or a couple of washers under std spacer) Alternator bracket 2 off £10 each Dry sump pump bracket £20 Thermostat housing and 86 deg Tstat £15 Starter motor spacer 1 off £5 EU2 rover wiring loom stripped out for caterham fit £30 All collect from Bristol or pay postage or delivered to stoneleigh on monday Simon 07976 633997 Edited by - tiddy1 on 19 Apr 2008 09:07:53 Edited by - tiddy1 on 19 Apr 2008 13:21:47 Edited by - tiddy1 on 20 Apr 2008 08:41:34 Edited by - tiddy1 on 22 Apr 2008 15:21:15 Edited by - tiddy1 on 1 May 2008 13:00:56 Link to comment Share on other sites More sharing options...
SimonMac Posted April 18, 2008 Share Posted April 18, 2008 Could I have the bellhousing, CRB and clutch arm please? Thanks Link to comment Share on other sites More sharing options...
yopcha Posted April 19, 2008 Share Posted April 19, 2008 Its not a cat exhaust by chance, Cheers Markus Link to comment Share on other sites More sharing options...
Jason Plato Posted April 19, 2008 Share Posted April 19, 2008 I'll take the wiring loom please Simon is it ok to see you at the next Bristol meet or the Combe races on the bank holiday ? ta dave here is C7 TOP Taffia rear gunner Link to comment Share on other sites More sharing options...
tiddy1 Posted April 19, 2008 Author Share Posted April 19, 2008 Markus, it is just the primaries and collector there is no silencer so could be either Simon Link to comment Share on other sites More sharing options...
Hurtle Posted April 19, 2008 Share Posted April 19, 2008 Can I have the water rail and a starter spacer please. Thanks Jason Edited by - Hurtle on 19 Apr 2008 11:19:03 Link to comment Share on other sites More sharing options...
tiddy1 Posted April 22, 2008 Author Share Posted April 22, 2008 Link to comment Share on other sites More sharing options...
Dannyboy Posted April 22, 2008 Share Posted April 22, 2008 Is the loom a full caterham loom? Dannyboy Link to comment Share on other sites More sharing options...
tiddy1 Posted April 22, 2008 Author Share Posted April 22, 2008 Danny, no it is a rover 216 loom which has had teh excess wires removed, but it needs to be re-taped and finished off. I was using it with an Emerald installation Simon Link to comment Share on other sites More sharing options...
alan7 Posted April 22, 2008 Share Posted April 22, 2008 Can I have the Alternator & New exhaust gasket please Simon. I've still got the set of HT leads sat on the bench if you still want them Alan How do you get the dead flies off your teeth....... 😬 R5AAH Link to comment Share on other sites More sharing options...
A.J. Posted April 22, 2008 Share Posted April 22, 2008 If it is still available can I have first dibs on the oil filter mount. I will need to have it posted to Lincolnshire. You can either e-mail or ring me on 07966 273626 and we can work out the details. Thanks A.J. Link to comment Share on other sites More sharing options...
Tonycaterham Posted April 22, 2008 Share Posted April 22, 2008 Hi Simon YHPM Tony L7 EVL Link to comment Share on other sites More sharing options...
tiddy1 Posted May 1, 2008 Author Share Posted May 1, 2008 Some price reductions can dliver bits to stoneleigh on monday Link to comment Share on other sites More sharing options...
LesG Posted May 1, 2008 Share Posted May 1, 2008 Hi Simon, Do you still have a Xflow clutch cable available? 07974 215666 if you have please. Cheers, Les. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now