allegro Posted May 24, 2002 Share Posted May 24, 2002 I was topping up my gearbox and came across a valve - I think. On the housing on the exit of the gearbox - 6 speed, before the prop shaft. It has a small black pipe leading away from it. It looks about the same size of an oil pressure sender. What is it question.gif It is also quite loose. Is this normal question.gif If not how do I tighten it up question.gif thanks Andy Mac teeth.gif Team Langoustine. Hard Core Prawn. See you at LeHoux teeth.gif Link to comment Share on other sites More sharing options...
tbhall777 Posted May 24, 2002 Share Posted May 24, 2002 Sounds like the reverse light switch. Link to comment Share on other sites More sharing options...
allegro Posted May 24, 2002 Author Share Posted May 24, 2002 It is a brass case about 40mm dia by 25mm thick attached to the casing on the exit of the gearbox by a brass coupling. It does not look like a switch. Andy Mac teeth.gif Team Langoustine. Hard Core Prawn. See you at LeHoux teeth.gif Link to comment Share on other sites More sharing options...
tbhall777 Posted May 24, 2002 Share Posted May 24, 2002 Go to this site and have a look at the gearbox pic's. http://homepage.ntlworld.com/roybooth/willfly/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now