RDEX Posted May 21, 2002 Share Posted May 21, 2002 I have a problem with the passenger side break light in my K series. There seems to be a connection problem, the break light on the other side works fine, but only the break light is out on the other cluster. I have disconnected the plug under the wing but the power isn’t getting through to the plug and socket. I followed the wire up but it runs above the Diff and I can’t get to it. Any ideas where I might look for a week connection or how to get to the wire running above the drive shaft? Any ideas gratefully received. Link to comment Share on other sites More sharing options...
Flying kiwi Posted May 21, 2002 Share Posted May 21, 2002 I had the exact same problem, So i asked my beloved wife to sit in the car continually pressing the brake pedal while i played around with the brake light fitting, And after a while [1 minute] the brake light worked. I have now put some vaseline on the contacts to prevent moisture getting in. Have a fiddle, it worked for me. Kiwi. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now