Dan J Posted May 21, 2002 Share Posted May 21, 2002 I've acquired a petrol king regulator and need to set it to the right pressure for my DCOE 40's, approx 2.5 - 3psi. I know I can set it with some clear tube and 2.8 metres height should equate to 3psi, however I 'know' that I'll end up with petrol everywhere. :o))) So, does anyone have a gauge I can borrow for just as long as it takes to set (Crowborough - Kent/Sussex border)? Or can I (as has been suggested off list) use a suitable dial type tyre pressure gauge??? I really need to do this ASAP as I'm due at the Se7ens Rolling Road day at Emerald this Sunday!!!! Dan Fury K Link to comment Share on other sites More sharing options...
John Howe Posted May 21, 2002 Share Posted May 21, 2002 Dan, Dave Walker has a gauge and can check/adjust yours in seconds on Sunday. Alternatively, drop into a local garage - that what I do. If your really stuck - phone me (01444 892127), I'm only around the corner in Highbrook, Ardingly Link to comment Share on other sites More sharing options...
Dan J Posted May 22, 2002 Author Share Posted May 22, 2002 Thanks John, I wasn't sure if i was worrying unnecessarily. So i'll set it in the middle of it's range and leave the rest to Emerald on the day. Cheers Dan Link to comment Share on other sites More sharing options...
StewartG Posted May 22, 2002 Share Posted May 22, 2002 Position 3 is about right. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now