Steve Brown Posted February 18, 2008 Share Posted February 18, 2008 Twin axled, mini E-Tech. The same dimensions as a Brian James Minno - ie it will fit in a standard single garage. The trailer also has the following "extras": - Tyre rack, with PVC covering to stop the car on the trailer getting splattered en route ! - Centre decking - Manual winch - Hitch lock - 5 new tyres - Rear support stands Pictures are available on request. Price - £1,200 Link to comment Share on other sites More sharing options...
mav Posted February 18, 2008 Share Posted February 18, 2008 It's a nice clean trailer Link to comment Share on other sites More sharing options...
neil.cavanagh Posted February 18, 2008 Share Posted February 18, 2008 could be interested.... what are the exact dimensions/model? My car is very close to getting onto the smaller BJs. Link to comment Share on other sites More sharing options...
Graham Howard Posted February 18, 2008 Share Posted February 18, 2008 Steve YHM Graham Link to comment Share on other sites More sharing options...
Steve Brown Posted February 19, 2008 Author Share Posted February 19, 2008 Thanks for the kind words Mav Neil - The dimensions are the same as PRG's renamed Mini Sport which shows on their brochure as being bed length 3.353m, bed width 1.651m - I'll check these with a tape measure tonight! My R400 with 8" rears fits OK. As with a Minno, an SV / CSR wouldn't fit. Overall trailer length is 4.58m and overall width 2.05m. Graham - YHM back I've been very pleased with PRG (the trailer and the people), and am only looking to sell to fund a new covered PRG. Thanks for the interest so far Link to comment Share on other sites More sharing options...
neil.cavanagh Posted February 19, 2008 Share Posted February 19, 2008 Cheers Steve... too small. Just as an aside... Minnows are now 171cm wide.. and my SV as measured last night was 164 at front and 168 at rear wide so in theory possible for SV to fit. Just trying to find a new model minnow to try it out on... Link to comment Share on other sites More sharing options...
Steve Brown Posted February 20, 2008 Author Share Posted February 20, 2008 Neil - I checked the measurements last night, and they are correct. Oh well, good luck with the search. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now