AndyPandy Posted February 11, 2008 Share Posted February 11, 2008 Well the car now has to go Here's the spec: s3 in Honda Monte Carlo Blue Very good condition Expertly built by Rob Walker Registered March 07 with 07 plate 3k miles and I'm ashamed to say that it hasn't been on any track days Full superlight roll cage 270 bhp with 199 lb/ft torque 280 degree cams with 11.3mm lift AP uprated clutch Emerald ecu Raceline SS exhaust with SVA and non cat cans Titan dry sump with Pace 6.5" dry sump tank Radtec Ali race radiator Lowered floor on drivers side FIA battery switch Ventureshielded on vulnerable areas. Road and Race 3.62 ZF diff with Quaiffe 5 spd box 2.04 1st 0.87 5th Just to reiterate the car hasn't been on any track days. The brakes were bedded in for it's SVA at Llandow circuit over a couple of hours at below 4500 rpm. It wasn't at a track day and this period was also used to run the engine in before it's first oil change (and visit to Emerald) at approx 50 miles. This car is insanely fast and handles like it's on rails.Rob did a brilliant job-I just wish I had more time to drive it....and that the bank would lend me more money The car is advertised with pictures on www.pistonheads.com/sales/372021.htm Feel free to email me with any questions or call me on 07929 184392 or 01443 431413 £33,000 ono Edited by - AndyPandy on 6 Mar 2008 13:48:03 Edited by - AndyPandy on 6 Mar 2008 16:20:26 Link to comment Share on other sites More sharing options...
AndyPandy Posted February 11, 2008 Author Share Posted February 11, 2008 Advert now on pistonheads.com Link to comment Share on other sites More sharing options...
S47zz Posted February 12, 2008 Share Posted February 12, 2008 Andy Sorry to hear you're selling it - I only saw it once but it looked really nice Mal Link to comment Share on other sites More sharing options...
Rob Walker Posted February 12, 2008 Share Posted February 12, 2008 Hi Andy, Sorry to see that you are selling. I think that it should be pointed out that the engine was never optimised on our trip to Emerald, we arrived 6 hours late in the evening with only 70 miles on the engine and Dave did his best to get a working map done in the available time, hence only the one power run showing 270bhp/199lb ft. This is the most extreme spec of Duratec 2.3 that I have built to date and I would expect it to give at least 280bhp and 210 lb ft with further mapping and optimised cam timing. The engine was built from a new 2.3, has a fully ported head,ARP head and main bearing carrier stud kits, Omega Forged pistons, Arrow steel rods, Crank Keywayed,Full engine balance,Kent cams, uprated valve springs and steel retainers, Titan Dry sump system with single pressure and double scavenge stages. Titan steel lightweight flywheel and AP CSR clutch. The induction is Direct to head Jenveys 45mm with 8 injectors, 90mm ram pipes and Pipercross foam filter. The gearbox is the Quaife straight cut, close ratio, Heavy duty needle roller bearing (pro) box supplied by R&R. The car also has Caterham uprated front brakes and Tillet style composite seats. Rob Edited by - Rob Walker on 12 Feb 2008 08:36:36 Link to comment Share on other sites More sharing options...
AndyPandy Posted February 13, 2008 Author Share Posted February 13, 2008 Thanks for filling in the gaps Rob! Link to comment Share on other sites More sharing options...
AndyPandy Posted February 13, 2008 Author Share Posted February 13, 2008 Provisionally sold Link to comment Share on other sites More sharing options...
Rob Walker Posted February 13, 2008 Share Posted February 13, 2008 Gosh that was quick! someone is going to get a cracking car. Link to comment Share on other sites More sharing options...
6speedmanual Posted February 13, 2008 Share Posted February 13, 2008 Minno still for sale? If yes first dibs please. YHM. P Link to comment Share on other sites More sharing options...
AndyPandy Posted February 14, 2008 Author Share Posted February 14, 2008 Peter YHM Link to comment Share on other sites More sharing options...
AndyPandy Posted February 29, 2008 Author Share Posted February 29, 2008 Well the buyer has gone very quiet of late but I still need cash to expand the business so I guess the car is back for sale. Link to comment Share on other sites More sharing options...
AndyPandy Posted March 6, 2008 Author Share Posted March 6, 2008 BTTT as it is now definitely for sale 😬 Duratec 2.3 😬 Link to comment Share on other sites More sharing options...
AndyPandy Posted March 8, 2008 Author Share Posted March 8, 2008 BTTT Link to comment Share on other sites More sharing options...
AndyPandy Posted March 10, 2008 Author Share Posted March 10, 2008 Serious offers considered. Link to comment Share on other sites More sharing options...
AndyPandy Posted March 17, 2008 Author Share Posted March 17, 2008 BTTT Link to comment Share on other sites More sharing options...
AndyPandy Posted March 25, 2008 Author Share Posted March 25, 2008 BTTT Link to comment Share on other sites More sharing options...
AndyPandy Posted March 31, 2008 Author Share Posted March 31, 2008 Link to comment Share on other sites More sharing options...
AndyPandy Posted April 7, 2008 Author Share Posted April 7, 2008 Well it's alot cheaper than an R500 😬 😬 😬 😬 Duratec 2.3 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now