Support Team c7trp Posted February 10, 2008 Support Team Share Posted February 10, 2008 I'm stripping my head lamp brackets down for powder coating. Is it possible to remove the wiring without cutting the wires? I've tried removing the spade connectors from the head light bulb end, but the remaining bits are still too big to fit down the tubing. I assume I need to cut the cable, or am I missing something? Link to comment Share on other sites More sharing options...
F355GTS Posted February 10, 2008 Share Posted February 10, 2008 Tim, from the other end, undo the connector, you can lever out the yellow part easily and then depress the tags and pull the pins out of the back. You then draw the cables out from the Headlight end Mark Link to comment Share on other sites More sharing options...
Support Team c7trp Posted February 10, 2008 Author Support Team Share Posted February 10, 2008 Ta F355 - will give it a go Edited by - Tim Pollard on 10 Feb 2008 22:14:51 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now