Wiring of Ignition-kill switch and starter button

[Milesk]

Please can anyone help - I have a 1.4K series which I have rebuilt - I have removed the old key ignition and installed a Farnell start button (as suggested by Lotus Seven Club) and safty ignition/kill switch (ignition key & assembly removed) - On the ignition I have established White/red is starter motor signal, Brown blue I have no idea (??), Brown 12v battery supply, the two whites - Ignition on/off, White on its own no idea (??)

 

I believe I connect the outer blade on the start button to the now removed white/red from ignition - I then connect the other outer blade on the start button to the spare connector on the ignition.

 

Do I remove white/white and connect to safty ignition/kill switch

 

Then connect brown 12 battery supply to outer blade of safty ignition/kill switch

 

What do I do with Brown/blue wire (??)

 

What do I do with single white on its own

 

Would really appreciate anyones help

[Mick Day]

Miles

 

*wavey*Welcome aboard.

 

There used to be a URL to this sort of thing but it appears to have been taken down. However I have a suitable wiring diagram so if you would like to send me a Blatmail I'll forward it to you. just click on the little mail icon above my post.

 

Mick

[Ray Pearce]

Does this here help?

[Milesk]

Great - Thanks very much for all your all help - now working - Great - I'll be on the track in no time - only taken me 18 months!!