CAB Posted January 30, 2008 Share Posted January 30, 2008 Hello This has probably been done to death but several posts give conflicting information.... I have a K series with a wet sump and apollo oil/air seperator. I have recently drained the oil and carried out the sump gasket mod and removed the foam (no bits in the strainer). My build manual states 6.5 litres of oil for the initial fill and then top up as required, my handbook states 7 litres of oil (inc filter) and I think that the 7FAQ page states 7.5 litres. Has anyone actually measured accurately how much they put in? Cheers CAB Link to comment Share on other sites More sharing options...
CageyH Posted January 30, 2008 Share Posted January 30, 2008 Mine took about 7 to 7.5 litres. I added the 6.5, started the car, and measured the oil level, and topped up as required. Only dead fish go with the flow....! Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 30, 2008 Share Posted January 30, 2008 7 to 7.5 litres depending on how much is left in the engine. Follow Cagey's instructions and you should be OK Mark D Comp Sec Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now