Pleasantville Posted January 29, 2008 Share Posted January 29, 2008 Old topic I know, but how much do I need to do the primaries on the R500? Is 2" best? Best make/supplier? Are the benefits worth it? Thanks. Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted January 29, 2008 Leadership Team Share Posted January 29, 2008 60' of 1". I used CoolTec from DTs - IIRC I needed a 45' pack and a 15' pack. The 1" gives a much neater job going around the tighter bends. Also, It's applied wet. Stu. www.superse7ens.co.uk..........the rebuild 😬 Link to comment Share on other sites More sharing options...
Leadership Team Mcalvert Posted January 30, 2008 Leadership Team Share Posted January 30, 2008 And wear gloves while fitting - otherwise very itchy! Michael. Link to comment Share on other sites More sharing options...
philwaters Posted January 30, 2008 Share Posted January 30, 2008 Took a short section (near my starter motor) off one of my pipes this weekend as I am polishing them again to match the new silencer. The entire section was covered in a rust like material and whilst half of it came off, the pipe is badly stained to the extent that 400 grit wet & dry is hardly having any effect. {:(] Phil Waters Link to comment Share on other sites More sharing options...
Budjuggler Posted January 30, 2008 Share Posted January 30, 2008 the pipe is badly stained Oh my god noooooooooo 😬 Andy The Cat in front is a Toyota .... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now