Darren Harrold Posted January 28, 2008 Share Posted January 28, 2008 Any ideas where i can find this part for the rear water outlet? picture here I think i have seen something similar on new R400's Thanks Darren CSR230 Link to comment Share on other sites More sharing options...
BAZZA Posted January 29, 2008 Share Posted January 29, 2008 the R400 uses the standard ford part which is horrible, when the water rail was going to be on the exhaust side it had a similar casting to the one shown (much tiddier looking). Link to comment Share on other sites More sharing options...
Darren Harrold Posted January 29, 2008 Author Share Posted January 29, 2008 I agree - prefer the one in the pic. But I can't find where it is from? Looking to fit an electric water pump and want to keep the rad bypass loop. (Have EWP running flat out) Due to the way the current pump and thermostat are located means i have to fit the e.w.pump after the water exits the engine and before the rad. Darren Edited by - Darren Harrold on 30 Jan 2008 12:03:09 Link to comment Share on other sites More sharing options...
Dobuy Posted February 3, 2008 Share Posted February 3, 2008 I did the EWP on my Duratec, really happ with it. Fitted it on bottom hose. Pictures available here Dubai Duratec SV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now