henry21p Posted January 20, 2008 Share Posted January 20, 2008 ... is what size and where do i get one? (i.e. what do i search for?) Standard Eu3 K series lambda boss. need to put one in my collector.... Link to comment Share on other sites More sharing options...
CageyH Posted January 20, 2008 Share Posted January 20, 2008 Probably worth speaking to an exhaust manufacturer like Powerspeed, as they will probably weld one in for you. 1.8 DVA'd SuperSpurt still on L Plates Link to comment Share on other sites More sharing options...
henry21p Posted January 20, 2008 Author Share Posted January 20, 2008 I have someone AdamHay has recommended to put the boss in - I just need to buy one to post down to him...if i get stuck i might call powerspeed.... Link to comment Share on other sites More sharing options...
Mr Locust Posted January 20, 2008 Share Posted January 20, 2008 M18x1.5 is standard for sensors. If you were thinking of putting a wide band sensor on at any time in the future, there is one in the Innovate LC-1 kit. Ian Green and Silver Roadsport 😬 Edited by - Mr Locust on 20 Jan 2008 15:21:17 Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted January 20, 2008 Support Team Share Posted January 20, 2008 Southern Carburettors sell them. Yellow SL #32 - member of Drowned Rat Racing Link to comment Share on other sites More sharing options...
Jason Plato Posted January 20, 2008 Share Posted January 20, 2008 GP race ware sell them for a couple of quid . any engineers place will be able to drill the hole and weld it in for you . here is C7 TOP Taffia rear gunner Link to comment Share on other sites More sharing options...
jackb_ms Posted January 20, 2008 Share Posted January 20, 2008 Dave where are you going to fit it? I might have a spare one somewhere from a LC1 I'll have a look Jack Emily, The Very Yellow 21 Edited by - jackb_ms on 20 Jan 2008 20:17:14 Link to comment Share on other sites More sharing options...
Tony Whitley Posted January 20, 2008 Share Posted January 20, 2008 Bill Shurvinton used to flog them and he's near(ish) Adam. Maybe we can do a nano BB 😬 - I need one fitting too, and some collector mods/repairs. Link to comment Share on other sites More sharing options...
Jason Plato Posted January 21, 2008 Share Posted January 21, 2008 fit it at the single pipe *after* the 4-2-1 section Caterhams manifold often has the lambda located in the primary for number 4 cylinder only. here is C7 TOP Taffia rear gunner Link to comment Share on other sites More sharing options...
henry21p Posted January 25, 2008 Author Share Posted January 25, 2008 .... what 4-2-1 section..... ? 😬 4-1 in a 21's VHPD manifold Link to comment Share on other sites More sharing options...
henry21p Posted January 26, 2008 Author Share Posted January 26, 2008 Anyone got contact details for Mr Shurvington then? I'm off to geneva in a bit and need to get it to adam asap. Link to comment Share on other sites More sharing options...
Tony Whitley Posted January 26, 2008 Share Posted January 26, 2008 YHM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now