oldbutnotslow Posted January 14, 2008 Share Posted January 14, 2008 Demountable Spare Wheel Carrier for standard width Seven This is superbly engineered in chrome tubing pre wired for the number plate light. The carrier fixes by the black clamps to the Roll Bar at the top and via captive nuts to the lower chassis tube. Please not that you will need to to drill 2 holes in the back panel to allow the fixings to pass through. The carrier can then be mounted without compromising the boot cover or the hood (both can be fitted with the carrier in place. The fitting are a beautiful piece of engineering with stainless bolts. The centre large screw fixing is again superbly engineered. Could be used as a luggage carrier photographs here and here I do not have a clue as to value only to say that it really is a nice piece of kit. The first to make me a sensible offer will secure. Grant Taylor - OBNS Motorsport 😬 183 BHP of Black and 'Stone Chip'. YBNS VX Classic. 😬 Link to comment Share on other sites More sharing options...
Drumster Posted January 14, 2008 Share Posted January 14, 2008 Ist dibs on behalf of another sevener Chris Alston C7CAT 1800 Supersprint R248.89 ....and then I jumped in Link to comment Share on other sites More sharing options...
oldbutnotslow Posted January 14, 2008 Author Share Posted January 14, 2008 OK Chris Link to comment Share on other sites More sharing options...
Drumster Posted January 14, 2008 Share Posted January 14, 2008 Grant, Dibs was for Michael Calvert. At present he doesn't have internet access and he will let you know one way or the other. MC is hoping to get on to Blatchat tomorrow. Chris Alston C7CAT 1800 Supersprint R248.89 ....and then I jumped in Link to comment Share on other sites More sharing options...
oldbutnotslow Posted January 14, 2008 Author Share Posted January 14, 2008 Having spoken to Graham Torbitt who will be passing your area has offered to take the spare wheel carrier down next week(or 10 days) so it would save on postage. Regards Grant Grant Taylor - OBNS Motorsport 😬 183 BHP of Black and 'Stone Chip'. YBNS VX Classic. 😬 Link to comment Share on other sites More sharing options...
Drumster Posted January 14, 2008 Share Posted January 14, 2008 Grant MC doesn't live near me if that is what you are thinking? Link to comment Share on other sites More sharing options...
Nifty Posted January 14, 2008 Share Posted January 14, 2008 Where did you get that from Grant 🤔 Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
oldbutnotslow Posted January 14, 2008 Author Share Posted January 14, 2008 Sorry Chris I was assuming he did Grant Taylor - OBNS Motorsport 😬 183 BHP of Black and 'Stone Chip'. YBNS VX Classic. 😬 Link to comment Share on other sites More sharing options...
Leadership Team Mcalvert Posted January 15, 2008 Leadership Team Share Posted January 15, 2008 Hi - Chris - thanks for bringing this to my attention. What size holes approx are needed in the bottom chassis rails? I would certainly be interested in this subject to not needing too much cutting... Regards - Michael. Link to comment Share on other sites More sharing options...
Ian B Posted January 15, 2008 Share Posted January 15, 2008 Grant, if Michael doesn't want it, I might be interested so 2nd dibs for now please Is the "for standard width seven" because of the distance between the roll bar tubes? Ian - MI 5EVN - Slightly Vider SVelte model 😬 now repainted to match the Autocom headsets 😳 Link to comment Share on other sites More sharing options...
oldbutnotslow Posted January 16, 2008 Author Share Posted January 16, 2008 Michael. YHM Ian yes it is unfortunately. Grant Taylor - OBNS Motorsport 😬 183 BHP of Black and 'Stone Chip'. YBNS VX Classic. 😬 Link to comment Share on other sites More sharing options...
Ian B Posted January 16, 2008 Share Posted January 16, 2008 Hmm Do the roll bar clamps sit to the outsides of the luggage rack tubes? If so couldn't you simply extend the mounting bolt between the clamps and the luggage rack tubes to allow them to reach the wider seperated SV rollbar tubes? This is of course merely academic if Michael takes it, but just curious to know. Ian - MI 5EVN - Slightly Vider SVelte model 😬 now repainted to match the Autocom headsets 😳 Link to comment Share on other sites More sharing options...
Leadership Team Mcalvert Posted January 16, 2008 Leadership Team Share Posted January 16, 2008 YHM back Michael. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now