C2.0XE bits

[B Good]

Following a bad attack of 'upgradeitis', I have now got several boxes full of bits from a 13,000 mile 1993 C2.0XE 16v which need to go before they disappear into the black hole in the garage forever....

 

Bits for sale are:

 

1. VDO rev counter 0-7,000 rpm - standard issue CC jobbie vgc - ? £60

2. 7 month old - 300 mile duty CC Ali Rad - vgc - ? £120

3. Set of 4 OE pistons and rods - vgc - ? £75

4. Complete set of OE valves, hydraulic lifters, valve platform 'washers' and springs - good condition - ? £75

5. Pair QED Q38H Cams - vgc - 700 mile duty OK for hydraulic lifters and if QED literature accurate good for 190 - 200 bhp with appropriate fuelling and exhaust - ? £175

6. Standard steel flywheel and 13k mile clutch - ? £30

7. Ali inlet manifold and standard throttle body ?£40

8. Bosch OE ecu ?£20

9. Standard OE fuel pressure regulator - vgc - ?£25

10. Set of 4 standard 'blue' OE injectors - ?£30

11. Standard CC single pipe with cat exhaust system complete ?£120 (available mid Jan 08)

 

Will all be going on ebay in the week if not sold.

[B Good]

Oops - Just checked the cams and they are the QED Q42H cams - sorry

[scooter]

I'll take the Rad and the cams!

 

Edited by - scooter on 15 Dec 2007 11:37:25

[B Good]

Hi Scooter, no problem - drop me an email with contact details, I will reply / send you my address for posting cheque

 

I will get the rad and cams packaged up on Monday and sent by Royal Mail.

 

Best wishes

 

Mark Bozier

 

 

[scooter]

Email will be with you very soon!

[scooter]

Hi Mark - Have my Blat-Mails been getting through?

[B Good]

Hi Scooter,

 

YHM

 

Regards

 

Mark Bozier